Silweld Silicone Self-Fusing Repair Tape 3M

Silweld is an incredible new silicone self-fusing tape that can be used to repair almost anything from an emergency repair to a water hose or air pipe to insulating electrical wires or connections. It creates an air-tight, watertight seal in seconds without the need for any adhesive.

Limitations: Silweld starts fusing immediately upon application and is NOT reusable. Should you wish to reposition the tape, unwrap the tape within 30 seconds to re-use.

Also available in a case of 6 - SAVE ££ - See: Case of 6 x Silweld Silicone Self Fusing Repair Tape 3M

Silweld Silicone Self-Fusing Repair Tape 3M Usage Instructions

1. Ensure surfaces are clean and free from dust
2. Separate the tape from the liner and press the tape firmly onto the surface, starting at the repair point
3. Work the tape to 3 to 4 centimetres on either side of the repair, stretching while wrapping
4. To ensure a good seal wrap the tape with a two-thirds overlap, the tape should be stretched to twice its original length
5. The longer the stretch the stronger the seal will be
6. For non-pressure repairs it is advised to wrap the tape around at least 3 to 4 times, for pressure repairs increase this to 6 to 7 times

Silweld Silicone Self-Fusing Repair Tape 3M Technical Information

• Weight: 0.075kg
• Barcode: 5029347611279