HG Complete Bathroom Care Kit

Directions For Use:

HG Professional Limescale Remover:
Dosage: Use HG Blue Professional Limescale Remover undiluted or up to 1:10 (with water). For bathtubs always dilute HG Blue with a minimum of 10 parts water (1:10).
Directions for use: Apply HG Hagesan Blue with a sponge (such as a scotchbrite type pad with sponge). Leave HG Hagesan Blue to work for a few minutes to dissolve lime and scale, then clean with a sponge and rinse off thoroughly with water. Use the scouring side of the sponge to remove stubborn scale, but not on chrome or gold-plated surfaces. Rinse away streaks running down walls with water.
Shower Heads (nozzles): If functioning badly due to limescale build-up, immerse in a bowl of undiluted HG Hagesan Blue for 30 minutes and finish off by brushing, rinse with water.
Glass that has lost its lustre: Immerse for at least 10 minutes in a washing bowl, dilution 1:10 HG Hagesan Blue with water, brush and rinse with water.
For regular cleaning: Use HG Hagesan Bath Shine. To remove dirty mould or mildew marks on silicone seals use HG Hagesan Mould Spray.

Attention: Do not use HG Hagesan Blue on Marble, Travertine, Terrazzo, Granito and other lime containing surfaces, vunerable paintwork, lead glazed materials and non-acid resistant surfaces, including Vogue Baths. Some bath enamels are not acid resistant and may be dulled by HG Hagesan Blue. If in doubt try a small test area first.

HG Mould Remover Foam Spray:
Directions for use: Remove the locking clip before use.
If you have used the bottle before, remnants of the liquid may be left in the nozzle, causing it to work less well when you reuse the bottle. Before resuing the bottle, we recommend you rinse the nozzle with hot tap water, e.g. by running the water through the air holes at the side of the foam pipe. The product has a bleaching effect, so in case of doubt, start by testing it in an unobtrusive place.
Do not remove mould first. Press the nozzle at the front side and turn a quarter.
Spray the surface from a distance of 3-5 cm. In case of persistent dirt, spray again after 30 minutes and leave it to work for another 30 minutes.
Clean the sprayed surface with water and a sponge. Wash off elastic joints (e.g. sillicone sealant) after approx 30 minutes and spray again.
Turn the nozzle backwards a quarter turn after use to the blocking position.
For cleaning large surface areas with green deposits, we recommend HG "Algae and mould remover"

Dosage:
2-3 m sq wall surface, 6-8 m sq tile joints.

Attention: 
We recommend you ventilate well during use and wear rubber/plastic gloves.
Prevent splashing on your clothing, gloss paint or slats. Rinse immediately with water on contact. 
Prevent contact with metals, such as prints on decorative strips, aluminium and stainless steel. 
Do not treat coloured surfaces.
We do not recommend using this product on ceilings with decorative plaster.

HG Shower and Washbasin Spray:
Directions for use: Turn the nozzle on the front side either a quarter turn to the left or right (STREAM / SPRAY).
Simply spray HG Shower and Washbasin Spray on the surface. 
Leave HG Shower and Washbasin Spray for a short while (wipe with a sponge if desired) and rinse. Preferably dry with a cloth, a window wiper or a leather.
Turn the nozzle a quarter of turn after use (OFF).
To remove severe limescale HG Blue Professional Limescale Remover or HG Scale Away is recommended.
For removal of copper oxide, urine stains etc use HG Blue Professional Limescale Remover. To remove brown or black marks use HG Mould Spray.

HG Super Powerful Toilet Cleaner: 
Usage Instructions:
1. Squeeze the sides of the lid and simultaneously turn the lid to open. 
2. Spray HG Super Powerful Toilet Cleaner deep under the rim of the toilet bowel and in the bowl. 
3. Leave the HG Super Powerful Toilet Cleaner gel to work at least 20-30 minutes and brush the toilet bowel clean with a toilet brush. 
4. Finally flush the toilet.

Barcode: 7426771213686
Weight: 2.2kg