HG Natural Stone Cement Grout Film Remover (Product 31) 1 Litre

HG Natural Stone Cement Grout Film Remover removes cement film, grout residue, water marks, limescale residues and stubborn dirt from marble and other sorts of calcareous and natural stone such as travertine, limestone, granite, terrazzo and ashlar. Can also be used safely on plastic tiled surfaces that contain bits of natural stone, such as granite and marble composites

Acid free and effective: Dissolves cement deposits and lime films from the tile surface but not the cement from the grouting. Easy to use and gentle on all types of natural stone

Coverage: 30-40m² per litre.

Size: 6 x 1 Litre
Also Available Individually See: HG Natural Stone Cement Grout Film Remover (Product 31) 1 Litre

HG Natural Stone Cement Grout Film Remover (Product 31) Usage Instructions

Read all precautions before using HG Natural Stone Cement Grout Film Remover. Wear Eye Protection (saftey glasses) and rubber gloves. Remove any loose cement, grout and lime scale as much as possible by sweeping. Wet the surface to be cleaned.

1. Dilute 1:10 with warm water (approx.120°F).
2. Apply with a scrubbing brush and brush softly on the wet floor.
3. Leave to penetrate for approx. 5 minutes, keeping the surface damp, then scrub thoroughly and rinse with clean water afterwards.
4. Do not use too much water when rinsing. It is highly recommended to use a wet vacuum cleaner after rinsing with water. If residues prove difficult to remove use a suitable synthetic scubbing pad.

For cleaning of walls: see above directions for use. Ensure that the wall is wet. Work from below upwards to prevent dripping.

Attention: To aviod etching calcareous natural stones, do not use acids, but only HG Natural Stone Cement Grout Film Remover.

HG Natural Stone Cement Grout Film Remover (Product 31) Technical Information

Barcode: 8711577029678
Weight: 6.89kg