Whirlpool Spa Bath Maintenance Kit (5 Piece)
Whirlpool Spa Bath Maintenance Kit - SAVE £££'s Whilst using the whirlpool, spa bath or jacuzzi undesirable bacteria growth (eg. legionella) and dirt from limescale, soap, grease and oil can form in the bath.
Whilst using the whirlpool, spa bath or jacuzzi undesirable bacteria growth (eg. legionella) and dirt from limescale, soap, grease and oil can form in the bath. After emptying, the whirlpool's internal system will be polluted further by bacteria growth and encrustation of dirt. In some cases this can result in an unpleasant smell.
HG Hygienic Whirlpool Cleaner cleans the whirlpool system in a hygienic manner, and through natural products, without danger to the integrated system or the environment. There will be no problems with the removal of the pollution and the sources of unpleasant odours.
Regular use of HG Hygienic Whirlpool Bath Cleaner will extend the life cycle of the whirlpool.
2 x 1 litre Approx. 24 weeks supply
Pure-Spa Whirlpool Sanatiser Tablets are for regular sanitising treatment of your Whirlpool, Indoor Jacuzzi orSpa Bath. For a fresher more hygienic system. Minimise growth of bacteria.
Use after each use of the bath.
3 x Packs of 30 Tablets
Usage Instructions: Hygienic Whirlpool Cleaner
For whirlpools with internal and semi-automatic cleaning systems:
1. Fill the internal cleaning system with HG Whirlpool Cleaner.
2. Follow the directions for use of your whirlpool.
For whirlpools without internal cleaning systems:
1. Fill the whirlpool with warm water to 5cm above the highest openings of the water or air jets.
2. Pour 50-75 ml (1-1.5 cups) of HG Whirlpool Cleaner directly into the bath.
3. Turn on all the systems for 15 minutes.
4. Empty the bath and rinse with clean water.
Repeating the treatment with clean water is not necessary. To prevent the build up of dirt it is advisable to clean the whirlpool every 2-3 weeks, depending on usage.
Usage: 50-75 ml (1-1.5 cups) per use.
Attention: If you wish to remove the smell of HG Whirlpool Cleaner from the system, repeat the treatment with clean water.
If your whirlpool has not been cleaned for some time, use 250ml (5 cups), once only.
Do not allow any undiluted liquid to come into contact with calciferous and non-acid resistant surfaces such as marble.
Usage Instruction: Sanitiser Tablets (Average size bath)
1. After each use of the bath and before emptying, put 1 tablet into the bath water.
2. Switch on the system and let it run for 2-3 minutes.
3. Switch off the system and drain as normal.
4. Your whirlpool bath has now been effectively treated.
Weight: 3kg
Whilst using the whirlpool, spa bath or jacuzzi undesirable bacteria growth (eg. legionella) and dirt from limescale, soap, grease and oil can form in the bath. After emptying, the whirlpool's internal system will be polluted further by bacteria growth and encrustation of dirt. In some cases this can result in an unpleasant smell.
HG Hygienic Whirlpool Cleaner cleans the whirlpool system in a hygienic manner, and through natural products, without danger to the integrated system or the environment. There will be no problems with the removal of the pollution and the sources of unpleasant odours.
Regular use of HG Hygienic Whirlpool Bath Cleaner will extend the life cycle of the whirlpool.
2 x 1 litre Approx. 24 weeks supply
Pure-Spa Whirlpool Sanatiser Tablets are for regular sanitising treatment of your Whirlpool, Indoor Jacuzzi orSpa Bath. For a fresher more hygienic system. Minimise growth of bacteria.
Use after each use of the bath.
3 x Packs of 30 Tablets
Usage Instructions: Hygienic Whirlpool Cleaner
For whirlpools with internal and semi-automatic cleaning systems:
1. Fill the internal cleaning system with HG Whirlpool Cleaner.
2. Follow the directions for use of your whirlpool.
For whirlpools without internal cleaning systems:
1. Fill the whirlpool with warm water to 5cm above the highest openings of the water or air jets.
2. Pour 50-75 ml (1-1.5 cups) of HG Whirlpool Cleaner directly into the bath.
3. Turn on all the systems for 15 minutes.
4. Empty the bath and rinse with clean water.
Repeating the treatment with clean water is not necessary. To prevent the build up of dirt it is advisable to clean the whirlpool every 2-3 weeks, depending on usage.
Usage: 50-75 ml (1-1.5 cups) per use.
Attention: If you wish to remove the smell of HG Whirlpool Cleaner from the system, repeat the treatment with clean water.
If your whirlpool has not been cleaned for some time, use 250ml (5 cups), once only.
Do not allow any undiluted liquid to come into contact with calciferous and non-acid resistant surfaces such as marble.
Usage Instruction: Sanitiser Tablets (Average size bath)
1. After each use of the bath and before emptying, put 1 tablet into the bath water.
2. Switch on the system and let it run for 2-3 minutes.
3. Switch off the system and drain as normal.
4. Your whirlpool bath has now been effectively treated.
Weight: 3kg