Ronseal 6 Year Anti Mould Paint Spray Matt White 400ml

Ronseal 6 Year Anti Mould Paint Aerosol Matt White only takes 10 minutes to dry and gets into all those hard to reach places. It will keep your surface mould free for up to 6 years. You'll need to put on 2-3 coats but there are no brushes to clean up when you're done.

Usage Areas: All indoor walls and ceilings.
Compatibility: Bare and previously painted walls and ceilings.

• Active biocide keeps your paint mould free for up to 6 years
• Stops all types of mould (including black mould)
• Moisture and steam resistant
• Tough, scrubbable finish
• Coverage: Up to 13m² per Litre
  

Colour: White
Finish: Matt

Size: 6 x 400ml
Also Available Individually See: Ronseal 6 Year Anti Mould Paint Spray Matt White 400ml

Ronseal 6 Year Anti Mould Paint Spray Matt White Usage Instructions

Before You Start: Make sure your room is above 10°c. Open your doors and windows for ventilation. Put down dust sheets to protects anything you don't want to get paint on and mask the surrounding areas to avoid overspray.

Preparation: Newly plastered walls: If you've had your walls and ceilings plastered, leave it to dry for 7 days. Then seal it before putting on Ronseal Anti Mould Paint.

Preparation: Previously painted walls: Get rid of any loose paint or plaster by giving it a quick sand.

1. Shake the can until you hear it rattle, then keep going for 1 minute.
2. Hold the can upright, 20-30cm away from the wall or ceiling and spray from side to side to get an even finish.
3. Put on 2-3 coats, leaving 10 minutes between each coat.
4. After your last coat leave it 24 hours before letting condensation build up in the room.

Don't paint over Ronseal Anti-Mould Paint with anything else. This stops it working.

Clean Up: Hold the can upside down and spray for a few seconds. Then wipe the nozzle with a damp cloth.

Ronseal 6 Year Anti Mould Paint Spray Matt White Technical Information

Barcode: 5010214874811
Weight: 3.19kg

To Download the Safety Data Sheet (PDF) Click HERE