HG Natural Stone Protector 1 Litre Product 33

This HG natural stone protector is an easy-to-apply polymer emulsion. This emulsion forms a wafer-thin glossy yet extremely protective coating. Perfect for protecting marble or other natural stone and giving it a glossy shine.

Size: 1L

Also available individually See: HG Natural Stone Protector 1 Litre Product 33

HG Natural Stone Protector Product 33 Usage Instructions

Note: Prior to applying HG Natural Stone Protector the surface should be thoroughly cleaned with HG Marble and Natural Stone Stripper. Or in the case of cement or grout film residues, use HG Natural Stone Cement Grout Film Remover. Allow the floor to dry for 3 days, in case of floor heating, 24 hours. Underfloor heating should be switched off 12 hours before treatment with HG Natural Stone Protector.
Application by hand: Dilute HG Natural Stone Protector with an equal part of clean water. Apply HG Marble and Natural Stone Protective Coating Gloss Finish with a wax applicator or Non-Fluffy Cloth. spread thin and evenly in one direction, and allow to dry for 45 minutes, before applying a second coat at right angles from the first coat. It is possible to walk over the protection after 3 hours. The layer has completely cured after 3 days. Do NOT rub or buff, but leave to dry naturally.
Application by polishing machine: Dilute HG Natural Stone Protector with an equal part of clean water. Spray dilution on no more than 25 sq/ft of surface and polish with a machine fitted with felt or white synthetic pad, and polish at 300 rpm.

Coverage: 60-80 m² per litre per layer, depending on the suction force of the floor.

HG Natural Stone Protector Product 33 Technical Information

Barcode: 8711577024697
Weight: 6.5kg