Associated Products
Bonda Seal Clear 250ml
Bonda Seal Clear is a high gloss sealer for use on wood, metal and brick.
Bonda Seal Clear 250ml
Bonda Seal Clear is a high gloss sealer for use on wood, metal and brick. It is formulated from high performance resins to provide a non-porous sealer with outstanding non-yellowing properties and gloss retention. The coating is tough but yet flexible and has excellent adhesion to many materials. It is resistant to oils, fuels and a range of aggressive chemicals at low concentrations.
Type: A moisture cured single part polyurethane varnish.
Intended Use: To be applied for marine use. For wood, masonry, concrete, cement and stone floors.
Special Features: The coating is tough yet flexible and has excellent adhesion to many materials. Bonda seal is resistant to oils, fuel
Coverage: 500g/m²
To Download the Product Data Sheet (PDF) for Bonda Seal Clear Click HERE
Size: 250ml
Also Available: Bonda Seal Clear 500ml, Bonda Seal Clear 1 Litre and Bonda Seal Clear 5 Litre Sizes
Bonda Seal Clear Usage Instructions
Surface Preparation: The surface should be dry to enable maximum penetration.
Application: Brush apply in thin coats. Unless sanding between coats, apply each coat while the previous coat in finger tacky, normally 30-90 minutes. if left to harden sand surface in between coats.
For Wood: Dense, Oily or closely grained woods do not allow deep penetration and should be well sanded. for smooth surfaces sand in between coats.
Wood, Cork and Lino Floors: New floors can be protected and old floors given a new look, it is important that the floor has stabilised before application. The first coat should be thinned and all traces of wax removed.
Sealing Brick - Concrete: Loose cement, plaster, flaking brick or old paint should be removed. It is not recommended for dense surfaces such as quarry tiles. For damp coating 3 coats are normally required.
Coats: 3 coats are optimal.
Drying Time: 60-90 minutes.
Re-coating Time: Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats.
Application Temp: Can be applied in poor weather conditions, high humidity and at temperatures down to 0°C.
Bonda Seal Clear Technical Information
Barcode: 5014197121504
Weight: 0.27kg
Shelf-life/Storage: Many years if suitably stored unopened in original container. NOTE; this is a moisturehardened product so storage life of opened tins is limited.
Hazards: Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.
Clean-Up: Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.
To Download the Safety Data Sheet (PDF) for Bonda Clear Seal Click HERE
Bonda Seal Clear 250ml
Bonda Seal Clear is a high gloss sealer for use on wood, metal and brick. It is formulated from high performance resins to provide a non-porous sealer with outstanding non-yellowing properties and gloss retention. The coating is tough but yet flexible and has excellent adhesion to many materials. It is resistant to oils, fuels and a range of aggressive chemicals at low concentrations.
Type: A moisture cured single part polyurethane varnish.
Intended Use: To be applied for marine use. For wood, masonry, concrete, cement and stone floors.
Special Features: The coating is tough yet flexible and has excellent adhesion to many materials. Bonda seal is resistant to oils, fuel
Coverage: 500g/m²
To Download the Product Data Sheet (PDF) for Bonda Seal Clear Click HERE
Size: 250ml
Also Available: Bonda Seal Clear 500ml, Bonda Seal Clear 1 Litre and Bonda Seal Clear 5 Litre Sizes
Bonda Seal Clear Usage Instructions
Surface Preparation: The surface should be dry to enable maximum penetration.
Application: Brush apply in thin coats. Unless sanding between coats, apply each coat while the previous coat in finger tacky, normally 30-90 minutes. if left to harden sand surface in between coats.
For Wood: Dense, Oily or closely grained woods do not allow deep penetration and should be well sanded. for smooth surfaces sand in between coats.
Wood, Cork and Lino Floors: New floors can be protected and old floors given a new look, it is important that the floor has stabilised before application. The first coat should be thinned and all traces of wax removed.
Sealing Brick - Concrete: Loose cement, plaster, flaking brick or old paint should be removed. It is not recommended for dense surfaces such as quarry tiles. For damp coating 3 coats are normally required.
Coats: 3 coats are optimal.
Drying Time: 60-90 minutes.
Re-coating Time: Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats.
Application Temp: Can be applied in poor weather conditions, high humidity and at temperatures down to 0°C.
Bonda Seal Clear Technical Information
Barcode: 5014197121504
Weight: 0.27kg
Shelf-life/Storage: Many years if suitably stored unopened in original container. NOTE; this is a moisturehardened product so storage life of opened tins is limited.
Hazards: Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.
Clean-Up: Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.
To Download the Safety Data Sheet (PDF) for Bonda Clear Seal Click HERE
Associated Products