Everbuild Oil Away Spray 1 Litre

Everbuild Oil Away Spray is a ready to use high performance cleaner for drives, paths and patios. It is quick and easy solution for removing oil, petrol, diesel and grease stains from driveways, garage floors and car parks.

Works on most common surface types including concrete, stone, tarmac and most common paving materials. Everbuild Oil Away can also be used as a general cleaner to revive the look of pathway and patio areas.

PLEASE NOTE: If the surface is porous and the stain has been left for some time before removal is attempted then the oil will be increasingly difficult to remove. In such cases the HG Oil and Grease Absorber may be worth trying.

Coverage: Approx. 5-8m² per litre depending on porosity of substrate.

Size: 1 Litre

To Download the Product Data Sheet (PDF) for Everbuild Oil Away Click HERE

Everbuild Oil Away Spray Usage Instructions

Surface Preparation:
Remove any surface debris with a stiff brush. Large deposits of moss/algae should first be treated with HG Moss and Algae Remover prior to application of Oil-Away.

Application:
Always test a small inconspicuous area prior to full application.

Stain removal:
Oil-Away comes ready to use and does not need diluting. Spray Oil-Away directly onto the stain, work in well with a stiff bristled brush and leave for 5 minutes. Do Not allow Oil-Away to dry on the surface. Wash down the area with clean fresh water whilst scrubbing with a stiff bristled brush. Further applications may be required depending on the level of soiling. Should this be necessary, repeat procedure until stains are removed.

General Cleaning of Paths, Patios etc:
Dampen surface to be treated with water. Apply Oil-Away liberally over the area and work in well with a stiff brush. Wash down the area with clean fresh water whilst scrubbing.

Everbuild Oil Away Spray Technical Information

Barcode: 5029347611187
Weight: 1.1kg

Limitations:
+ Always test a small inconspicuous area first prior to full application.
+ Do not leave on Tarmac for more than 5 minutes. As quality / condition of Tarmac can vary significantly, always test on a small inconspicuous are first.
+ Do Not allow Oil-Away to dry on the surface.
+ Do Not apply to hot surfaces or in strong direct sunlight.
+ If Oil-Away comes into contact with plants or lawn edges, rinse thoroughly with clean water.
+ It is the users responsibility to determine suitability for use

To Download the Safety Data Sheet (PDF) for Everbuild Oil Away Spray Click HERE