Block Blitz Original Eco Cleaner Pouches 2 Packs of 380g

Block Blitz is not a one-off cleaning product. The solution is made from a powerful mineral and plant-based powder, designed as a treatment system to gradually clean and protect outdoor surfaces. For use on; block paving, paving slabs, tarmac, artificial grass, gravel and decorative aggregates, decking, concrete, stone, brickwork, roofs, rendering and timber.

Size: 760g x 6 (4.56kg Total)

Also available individually See: Block Blitz Original Eco Cleaner Pouches 2 Packs of 380g

Be Patient: Allow rainfall to rinse your surface. Block Blitz will gradually start to transform your surface. Please note Block Blitz will not restore the colour of weathered surfaces. Block Blitz has a slow secondary cleaning effect which will help to prevent re-growth of algae and moss for months afterwards. Block Blitz will also clean jointing material helping to deter future weed growth. Any newly emerging weeds can be spot-treated with a weed removal product.

Block Blitz Original Eco Cleaner Pouches Usage Instructions

Application Guidelines: Always apply to a dry surface. Do not apply if rain is forecast in the next 24 hours.

Standard Application: Apply Block Blitz every 5-6 months at any time of the year

Surfaces that are in poor condition: 

1. Apply the first application of Block Blitz. Leave to work for a minimum of 2 weeks

2. Spot treat any weed growth and moss with a weed removal product

3. Apply the second treatment of Block Blitz four weeks after the first treatment. Block Blitz will gradually break up surface debris and slowly disperse over time

Instructions: Wear suitable gloves and eye protection. Wear suitable clothing and footwear. Fill a 10-litre plastic watering can (fitted with a medium plastic rose) with cold water. Empty one pouch of Block Blitz into the 10 litres of cold water. Stir the solution until fully dissolved. Apply to the surface at the highest point to control the runoff. Excessive runoff could damage grass and plants. Apply evenly to soak the surface area. Leave to dry. Rinse off equipment with clean cold water.

Block Blitz Original can also be applied with a pressure sprayer. Measure out 10 litres of cold water into a bucket, slowly add one pouch and stir until fully dissolved. Carefully decant this solution into your spraying equipment. Apply evenly to soak the surface area. Rinse out equipment with clean cold water.

Please Note: Prior to use it is advisable to test on a small and inconspicuous area of the surface to be treated to check for suitability. Do not use galvanised metals. Not suitable for use with some types of polymeric jointing compounds. Block Blitz may leave a white residue, this is not hazardous and rainfall will slowly wash it away.

Block Blitz Original Eco Cleaner Pouches Technical Information

• Weight: 4.95kg
• Barcode: 0604565259080