3M Command Bathroom Shower Caddy Hanger Holds up to 3.4kg

The 3M Command Bathroom Shower Caddy Hanger allows you to keep your bathroom organized. Keep your Bath or Shower accessories in one place. Tested and proven to hold better than suction cups, the 3M Command Caddy Hanger is easy to apply and comes off cleanly without damage. Repositioning is easy with assorted water resistant refill strips. 

Holds up to 3.4kg

3M Command Bathroom Shower Caddy Hanger Fitting Instructions

To Apply:
1. Select location. If possible, choose a location where strips are not over grout lines. Important allow space above hanger for removal.
2. Clean and Dry surface. Clean surface with isopropyl rubbing alcohol, let dry. DO NOT use household cleaners to prep the surface. Separate strips.
3. Remove blue liner. Press adhesive to mounting base of hanger. repeat with second strip.
4. Remove black liners.
5. Press hanger to surface for 10 seconds.
6. Important: For maximum holding strength slide hanger off.
7. Press each base firmly for 30 seconds.
8. Slide hanger ON to the mounting base. 
9. If mounting in a shower or tub area: USE SHOWER AT LEAST ONCE AND THEN WAIT 24 HOURS to allow adhesive to build strength before attaching hanger.
If mounting outside of shower or tub area: WAIT 1 HOUR to allow adhesive to build strength before attaching hanger.

To Remove:
1. Slide hanger up remove from mounting base. Top rack Dishwasher safe.
2. NEVER pull strip towards you. Strip could break or damage surface if pulled outward.
3. Hold base gently to prevent base from snapping fingers. DO NOT press base against wall.
4. STRETCH STRIP STRAIGHT DOWN ALONG WALL AT LEAST 15 INCHES until base and strip release. Remove one strip at a time. Repeat steps with addional strips.

3M Command Bathroom Shower Caddy Hanger Technical Information

Barcode: 051141958415
Weight: 0.12kg