Wudcare 5 Minute Fast Grab PU Wood Adhesive 1kg

Wudcare 5 Minute Fast Grab PU Wood Adhesive is a strong polyurethane glue that has a fast initial grab time and will expand slightly to increase bite strength. For interior and exterior use. Fast Grab 5 minute has an initial grab time of 5 to 10 minutes and a firm bond in 4 hours. Full cure will require 24 hours. After setting, the bond is very stable resisting 'creep', immersion in salt water and exposure to the elements. Use on damp wood, hardwoods, concrete, metal, brick, tarmac, MDF, polystyrene, cork and fibreglass.

Type: A one part, cartridge-loaded, solvent free, fast setting moisture-curing polyurethane thixotropic gel adhesive.
Intended Use: Formulated for high performance water-resistant bonds between a wide range of materials. The thixotropic nature of the gel prevents slumping and gives a level of gap filling to the bond.
Special Features: Solvent-free, single pack, fast setting adhesive gel. Non-slumping. Expands slightly to increase bond-bite strength. Suitable for use in bonding together a variety of substrates used for joinery, wood constructions, boats, jointing sandwich panels and insulation. Excellent adhesion to wood, chipboard, polyurethane, mineral wool, concrete, stone, bricks, gypsum boards, traditional porous substrates. Excellent chemical resistance, weathering and aging properties. Meets water resistance requirements of BS EN 204 to durability category D4.
Coverage: Dependent on porosity and smoothness of surface and application.

To Download the Wudcare Product Brochure (PDF) Click HERE

Size: 1kg
Also Available in a Case of 6 - SAVE ££ - See: Case of 6 x Wudcare 5 Minute Fast Grab PU Wood Adhesive 1kg

Also Available: Wudcare 5 Minute Fast Grab PU Wood Adhesive 500g

Wudcare 5 Minute Fast Grab PU Wood Adhesive Usage Instructions

Preparation: Ensure surfaces are clean, dry and free of loose material.
Application: Note: one surface needs to be porous. Apply adhesive using a standard cartridge gun to one surface. Clamp surfaces together within 5 minutes. Best results are obtained by slightly moistening one surface with a damp cloth.
Coats: One application
Drying Time: Fixture time 5 - 10 minutes. Full cure in 12 hours.
Application Temp. Working range; +5 to +35°C.
Compatibility: Suitable for use with wood, chipboard, polyurethane, mineral wool, concrete, stone, bricks, gypsum boards and traditional porous substrates. .Unsuitable for use with polyethylene, poly propylene and other low surface energy materials.
Clean-Up: Use warm soap water while uncured.

Fast Grab is a moisture curing product. Dry substrates may need mist spraying. 

Test piece is always advisable before use.

Wudcare 5 Minute Fast Grab PU Wood Adhesive Technical Information

Barcode: 5025506001073
Weight: 1.2kg

Shelf-life/Storage: Minimum 12 months when stored in a cool, dry place out of direct sunlight in the original, sealed container. Do not store below +5 degrees Centigrade.
Hazards: Contains diisocyanates. Harmful by inhalation. Irritant. Avoid eye and skin contact as this product will bond surfaces together. In case of skin or eye contact wash copiously with water. Wear suitable protective glasses and gloves. Keep away from children.

To Download the Safety Data Sheet (PDF) for Wudcare 5 Minute Fast Grab PU Wood Adhesive Click HERE