Associated Products
Case of 6 x NitroMors All Purpose Paint and Varnish Remover Spray 500ml
NitroMors All Purpose Paint and Varnish Remover Spray strips up to twice the paint layers and stays active longer compared to dichloromethane based paint removers.
NitroMors All Purpose Paint and Varnish Remover Spray 500ml
NitroMors All Purpose Paint and Varnish Remover Spray is a fast acting dichloromethane free formula. Strips up to twice the paint layers and stays active longer compared to dichloromethane based paint removers. Tough on paint and kind to wood. An ideal solution for your DIY projects.
+ Non drip - ideal for vertical surfaces
+ Green coloured - see where you have applied it
+ Removes paint, varnish and lacquer
+ Water and solvent washable
+ Strips up to twice the paint layers and stays active longer compared to dichloromethane based paintremovers.
Size: 6 x 500ml
Also Available Individually See: NitroMors All Purpose Paint and Varnish Remover Spray 500ml
Also Available in other non-spray, brush on versions. See: Nitromors All Purpose Paint and Varnish Stripper.
NitroMors All Purpose Paint and Varnish Remover Spray Usage Instructions
Preparation:
+ Extinguish all ignition sources (fires, boilers, cooker, pilot lights etc.) DO NOT SMOKE
+ Wear suitable protective gloves and safety goggles.
+ Work outside if possible.
+ Ensure good ventilation when working indoors.
+ Protect surrounding area with polythene sheeting.
+ Do not use in direct sunlight.
+ Do not use in enclosed spaces, eg. cellars, floor wells etc.
Usage Instructions:
1. Shake thoroughly before use
2. Spray liberallyonto the surface or component from a distance of 15 to 20cm, ensuring a good coating.
3. Leave for up to 15 minutes to soften or dissolve the paint
4. Once the paint has blistered, apply a second coat. Agitate with a wire or nylon brush as appropriate, leave up to 40 minutes, if dried out re-apply.
5. Remove blistered and softened paint with a scraper or shavehook . In difficult areas use an old nylon toothbrush. Repeat as necessary. Wash off with detergent in cold water and a nylon scourer or use white spirit and wire wool to avoid raising the grain on fine or laminated woods. Allow to dry thoroughly and rub down with fine sandpaper or wire wool prior to refinishing.
NitroMors All Purpose Paint and Varnish Remover Spray Technical Information
Barcode: 5010373142752
Weight: 4.861kg
NitroMors All Purpose Paint and Varnish Remover Spray 500ml
NitroMors All Purpose Paint and Varnish Remover Spray is a fast acting dichloromethane free formula. Strips up to twice the paint layers and stays active longer compared to dichloromethane based paint removers. Tough on paint and kind to wood. An ideal solution for your DIY projects.
+ Non drip - ideal for vertical surfaces
+ Green coloured - see where you have applied it
+ Removes paint, varnish and lacquer
+ Water and solvent washable
+ Strips up to twice the paint layers and stays active longer compared to dichloromethane based paintremovers.
Size: 6 x 500ml
Also Available Individually See: NitroMors All Purpose Paint and Varnish Remover Spray 500ml
Also Available in other non-spray, brush on versions. See: Nitromors All Purpose Paint and Varnish Stripper.
NitroMors All Purpose Paint and Varnish Remover Spray Usage Instructions
Preparation:
+ Extinguish all ignition sources (fires, boilers, cooker, pilot lights etc.) DO NOT SMOKE
+ Wear suitable protective gloves and safety goggles.
+ Work outside if possible.
+ Ensure good ventilation when working indoors.
+ Protect surrounding area with polythene sheeting.
+ Do not use in direct sunlight.
+ Do not use in enclosed spaces, eg. cellars, floor wells etc.
Usage Instructions:
1. Shake thoroughly before use
2. Spray liberallyonto the surface or component from a distance of 15 to 20cm, ensuring a good coating.
3. Leave for up to 15 minutes to soften or dissolve the paint
4. Once the paint has blistered, apply a second coat. Agitate with a wire or nylon brush as appropriate, leave up to 40 minutes, if dried out re-apply.
5. Remove blistered and softened paint with a scraper or shavehook . In difficult areas use an old nylon toothbrush. Repeat as necessary. Wash off with detergent in cold water and a nylon scourer or use white spirit and wire wool to avoid raising the grain on fine or laminated woods. Allow to dry thoroughly and rub down with fine sandpaper or wire wool prior to refinishing.
NitroMors All Purpose Paint and Varnish Remover Spray Technical Information
Barcode: 5010373142752
Weight: 4.861kg
Associated Products