NitroMors All Purpose Paint and Varnish Remover 750ml

Nitromors All Purpose Paint and Varnish Remover is a fast acting dichloromethane free formula. Strips up to twice the paint layers and stays active longer compared to dichloromethane based paint removers. Tough on paint and kind to wood. An ideal solution for your DIY projects.

+ Non drip - ideal for vertical surfaces
+ Green coloured - see where you have applied it
+ Removes paint, varnish and lacquer
+ Water and solvent washable
+ Strips up to twice the paint layers and stays active longer compared to dichloromethane based paintremovers.

Coverage: 750ml covers up to 2m²

Size: 750ml

Also Available: NitroMors All Purpose Paint and Varnish Remover 375ml and NitroMors All Purpose Paint and Varnish Remover 2 Litre

NitroMors All Purpose Paint and Varnish Remover Usage Instructions

Preparation: 
+ Wear gloves and safety goggles. 
+ Work outside if possible.
+ Ensure good ventilation when working indoors.
+ Protect surrounding area with polythene sheeting.
+ Do not use in direct sunlight.
+ Not suitable for removing car paint or for contact with plastics.

Usage Instructions:
1. Pour NitroMors All Purpose Paint and Varnish Remover into overcap. Replace cap immediately. Apply a thick coat by brush with a dabbing action.
Do not brush out.
Only apply to areas up to 0.5m².
When paint has blistered (5-10 minutes) apply second coat, working into blisters. Leave for 40 minutes.
Do not allow to dry out.

2. Remove blistered/softened point with scraper or shavehook. Repeat process if necessary. Remove traces of stubborn paint by rubbing with wire wool dipped in NitroMors All Purpose Paint and Varnish Remover.
3. Wash down with detergent in cold water (use white spirit on fine woods to avoid raising the grain). Allow to dry thoroughly and rub down with fine sandpaper or wire wool.

NitroMors All Purpose Paint and Varnish Remover Technical Information

Barcode: 5010305004424
Weight: 0.81kg

To Download the Safety Data Sheet (PDF) for New Nitromors Click HERE