Rustins Strypit Paint and Varnish Stripper 500ml
Rustins new formula Strypit is a non-caustic dichloromethane-free gel suitable for removing multiple coats of paints and varnishes applied to wood, metal, glass, stone and masonry surfaces.
Rustins Strypit Paint and Varnish Stripper 500ml
Rustins new formula Strypit is a non-caustic dichloromethane-free gel suitable for removing multiple coats of paints and varnishes applied to wood, metal, glass, stone and masonry surfaces. Rustins Strypit works best when applied liberally and allowed to penetrate after two applications. The gel consistency permits effective use on vertical surfaces.
Type: Non Caustic. Dichloromethane free paint and varnish stripper.
Intended Use: For removing paint, varnish, cellulose, polyurethane, emulsion, French Polish, lacquer and textured finishes from wood, metal, glass or plaster.
Special Features: Specially formulated to avoid stripping the attractive patina acquired through age on old furniture. Free from acid and caustic
Size: 500ml
Also Available: Rustins Strypit Paint and Varnish Stripper 250ml, Rustins Strypit Paint and Varnish Stripper 1 Litre, Rustins Strypit Paint and Varnish Stripper 2.5 Litre and Rustins Strypit Paint and Varnish Stripper 5 Litre
To Download the Product Data Sheet (PDF) for Rustins Strypit Paint and Varnish Stripper Click Here
Rustins Strypit Paint and Varnish Stripper Usage Instructions
1. Use appropriate personal protection including gloves and eye protection. Shake tin well and remove cap carefully holding the tin away from face.
2. Brush on liberal coat with dabbing action. Leave until paint begins to soften or blistered, softened paint. Leave for a further 30 to 40 minutes.
3. Remove the blistered, softened paint with a stripping knife or scraper. If any paint or vanish remains, repeat the process. Use steel wool to remove paint from curved surfaces.
4. Wash down the surface thoroughly with water and allow to dry completely. On wood, white spirit can be used to wash down to avoid raising the grain.
On old paint or heavy applications Strypit can be left on longer to maximise penetration.
The rate of coverage is approximately 5m² per Litre
Coats: Apply 2 or more liberal applications depending on finish and substrate. On old paint or very heavy applications Strypit can be left on longer to maximise application.
Drying Time: Do not allow surface to dry during stripping. Apply more product if necessary.
Re-coating Time: Apply second application after 10 minutes. Repeat after 35-40 minutes if paint not fully stripped.
Application Temp: Ideally 15-25°C.
Compatibility: Should not be used on certain plastics or fibre glass.
Settlement: Shake well before use.
Cleaning Up: Collect waste in newspaper and dispose of safely in dustbin. Clean brushes with warm soapy water. Store in a cool dry place with lid tightly closed away from sources of ignition. Protect from frost.
Note: Not suitable on fibreglass, rubber and some plastics.
Rustins Strypit Paint and Varnish Stripper Technical Information
Barcode: 5015332510696
Weight: 0.61kg
Shelf-life/Storage: The shelf life of the product in an airtight container is a very long period of time. Store the product in a cool dry place.
Hazards: Highly Flammable. Keep away from all source of ignition – NO SMOKING. Keep out of reach of children. Do not breathe vapour. Take precautionary measures against static discharge. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. After contact with skin wash immediately with plenty of water. Wear suitable protective clothing and gloves.
To Download the Safety Data Sheet (PDF) for Rustins Strypit Click HERE
Rustins Strypit Paint and Varnish Stripper 500ml
Rustins new formula Strypit is a non-caustic dichloromethane-free gel suitable for removing multiple coats of paints and varnishes applied to wood, metal, glass, stone and masonry surfaces. Rustins Strypit works best when applied liberally and allowed to penetrate after two applications. The gel consistency permits effective use on vertical surfaces.
Type: Non Caustic. Dichloromethane free paint and varnish stripper.
Intended Use: For removing paint, varnish, cellulose, polyurethane, emulsion, French Polish, lacquer and textured finishes from wood, metal, glass or plaster.
Special Features: Specially formulated to avoid stripping the attractive patina acquired through age on old furniture. Free from acid and caustic
Size: 500ml
Also Available: Rustins Strypit Paint and Varnish Stripper 250ml, Rustins Strypit Paint and Varnish Stripper 1 Litre, Rustins Strypit Paint and Varnish Stripper 2.5 Litre and Rustins Strypit Paint and Varnish Stripper 5 Litre
To Download the Product Data Sheet (PDF) for Rustins Strypit Paint and Varnish Stripper Click Here
Rustins Strypit Paint and Varnish Stripper Usage Instructions
1. Use appropriate personal protection including gloves and eye protection. Shake tin well and remove cap carefully holding the tin away from face.
2. Brush on liberal coat with dabbing action. Leave until paint begins to soften or blistered, softened paint. Leave for a further 30 to 40 minutes.
3. Remove the blistered, softened paint with a stripping knife or scraper. If any paint or vanish remains, repeat the process. Use steel wool to remove paint from curved surfaces.
4. Wash down the surface thoroughly with water and allow to dry completely. On wood, white spirit can be used to wash down to avoid raising the grain.
On old paint or heavy applications Strypit can be left on longer to maximise penetration.
The rate of coverage is approximately 5m² per Litre
Coats: Apply 2 or more liberal applications depending on finish and substrate. On old paint or very heavy applications Strypit can be left on longer to maximise application.
Drying Time: Do not allow surface to dry during stripping. Apply more product if necessary.
Re-coating Time: Apply second application after 10 minutes. Repeat after 35-40 minutes if paint not fully stripped.
Application Temp: Ideally 15-25°C.
Compatibility: Should not be used on certain plastics or fibre glass.
Settlement: Shake well before use.
Cleaning Up: Collect waste in newspaper and dispose of safely in dustbin. Clean brushes with warm soapy water. Store in a cool dry place with lid tightly closed away from sources of ignition. Protect from frost.
Note: Not suitable on fibreglass, rubber and some plastics.
Rustins Strypit Paint and Varnish Stripper Technical Information
Barcode: 5015332510696
Weight: 0.61kg
Shelf-life/Storage: The shelf life of the product in an airtight container is a very long period of time. Store the product in a cool dry place.
Hazards: Highly Flammable. Keep away from all source of ignition – NO SMOKING. Keep out of reach of children. Do not breathe vapour. Take precautionary measures against static discharge. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. After contact with skin wash immediately with plenty of water. Wear suitable protective clothing and gloves.
To Download the Safety Data Sheet (PDF) for Rustins Strypit Click HERE