Sylglas Flashing Tape 150mm x 4M
Sylglas Flashing Tape Offers long lasting weatherproofing, giving an excellent seal and bonds to all common roofing and building surfaces.
Sylglas Flashing Tape
Offers long lasting weatherproofing, giving an excellent seal and bonds to all common roofing and building surfaces, also ideal as a general weatherproof tape providing a long-lasting seal around the home and garden
- Sealing and repairing damaged and worn flashings.
- Valley Gutter repairs, gutters and downpipes.
- Extension Flashing, porches and chimneys.
Lead like finish, no primer required.
Size: 150mm x 4M
Click to Download the safety data sheet for Sylglas Flashing Tape Here
Sylglas Flashing Tape Instructions for use
Sylglas Flashing tape is extremely simple to use. just follow the instructions, step by step, for a strong long lasting seal. it is recommended that you use gloves when applying.
- Make sure the surface is clean and dry. Remove ALL LOOSE DUST and DIRT with a wire brush and soft broom.
- Peel off 150mm of the interleaving. Press tape firmly into position and smooth down with a dry cloth. In cold, damp weather, keep tape warm or heat tape during application with a hair dryer or similar, to improve adhesion.
- Repeat the process with 300 - 600mm sections at a time until you have completed the area to be covered
- Once complete the tape offers a lead-like decorative finish.
Barcode: 5011768200330
Weight: 0.9 Kg
Click to Download the Sylglas Flashing Tape Technical Data Sheet Here
Sylglas Flashing Tape
Offers long lasting weatherproofing, giving an excellent seal and bonds to all common roofing and building surfaces, also ideal as a general weatherproof tape providing a long-lasting seal around the home and garden
- Sealing and repairing damaged and worn flashings.
- Valley Gutter repairs, gutters and downpipes.
- Extension Flashing, porches and chimneys.
Lead like finish, no primer required.
Size: 150mm x 4M
Click to Download the safety data sheet for Sylglas Flashing Tape Here
Sylglas Flashing Tape Instructions for use
Sylglas Flashing tape is extremely simple to use. just follow the instructions, step by step, for a strong long lasting seal. it is recommended that you use gloves when applying.
- Make sure the surface is clean and dry. Remove ALL LOOSE DUST and DIRT with a wire brush and soft broom.
- Peel off 150mm of the interleaving. Press tape firmly into position and smooth down with a dry cloth. In cold, damp weather, keep tape warm or heat tape during application with a hair dryer or similar, to improve adhesion.
- Repeat the process with 300 - 600mm sections at a time until you have completed the area to be covered
- Once complete the tape offers a lead-like decorative finish.
Barcode: 5011768200330
Weight: 0.9 Kg
Click to Download the Sylglas Flashing Tape Technical Data Sheet Here