Associated Products
Rustins Quick Dry Red Oxide Metal Primer 5 Litre
Rustins Quick Dry Red Oxide Metal Primer is a low odour high performance paint containing anti-corrosive additives for use on both bare and galvanised metal.
Type: Metal primer
Intended Use: On all bare metal for interior and exterior use.
Special Features: Quick drying and formulated with acrylic and special anti-corrosive pigments, to prevent corrosion.
Coverage 12-15m² per Litre per coat, depending on the absorbency of the surface.
Size: 5 Litre
Also Available in 250ml, 500ml, 1 Litre and 2.5 Litres
Application: Use a good quality brush and apply evenly.
Coats: 1 coat is usually sufficient. A second coat may be applied if required. Sand lightly between coats if required.Drying Time: 30 minutes depending on temperature and humidity.Re-coating Time: 4 hours.
Application Temp: Ideally 15-25°C. Do not use below 10°C, or in conditions of high humidity or if rain imminent when using outdoors.
Maintenance: The surface may be cleaned with a mild detergent solution or White Spirit as necessary. Worn areas may be re-coated once cleaned and lightly sanded to provide a key.
Compatibility: Must be over painted with an undercoat before application of top coat.
Settlement: STIR WELL BEFORE USE.
Clean-Up: Remove excess product from brushes before cleaning in water. Hard brushes can be cleaned with Rustin’s Brush Restorer.
Barcode: 5015332001422
Weight: 5.18kg
Hazards: Keep out of reach of children. Avoid contact with skin and eyes. After contact with skin, wash immediately with plenty of soap and water.
Type: Metal primer
Intended Use: On all bare metal for interior and exterior use.
Special Features: Quick drying and formulated with acrylic and special anti-corrosive pigments, to prevent corrosion.
Coverage 12-15m² per Litre per coat, depending on the absorbency of the surface.
Size: 5 Litre
Also Available in 250ml, 500ml, 1 Litre and 2.5 Litres
Application: Use a good quality brush and apply evenly.
Coats: 1 coat is usually sufficient. A second coat may be applied if required. Sand lightly between coats if required.Drying Time: 30 minutes depending on temperature and humidity.Re-coating Time: 4 hours.
Application Temp: Ideally 15-25°C. Do not use below 10°C, or in conditions of high humidity or if rain imminent when using outdoors.
Maintenance: The surface may be cleaned with a mild detergent solution or White Spirit as necessary. Worn areas may be re-coated once cleaned and lightly sanded to provide a key.
Compatibility: Must be over painted with an undercoat before application of top coat.
Settlement: STIR WELL BEFORE USE.
Clean-Up: Remove excess product from brushes before cleaning in water. Hard brushes can be cleaned with Rustin’s Brush Restorer.
Barcode: 5015332001422
Weight: 5.18kg
Hazards: Keep out of reach of children. Avoid contact with skin and eyes. After contact with skin, wash immediately with plenty of soap and water.