Loctite Rear View Mirror Bonder 0.5ml
Loctite Rear View Mirror Bonder is a specialist adhesive that permanently bonds glass to metal, resistant to UV, moisture and most chemicals.
Loctite Rear View Mirror Bonder 0.5ml
Loctite Rear View Mirror Bonder is a specialist adhesive that permanently bonds glass to metal, resistant to UV, moisture and most chemicals. It is ideal for glass mounted rear view mirrors, phone and radio aerials.
+ Suitable for glass and metal only.
+ Bonds in minutes.
+ Clean and easy to use.
Size: 0.5ml
Loctite Rear View Mirror Bonder Usage Instructions
Ensure hands and tools are free from grease and dirt before starting the repair. Adhesive performs best at room temperature.
1. The kit contains a tube of adhesive and an activated mesh. Trim mesh to the size of the mirror or aerial button.
2. Remove mounting button (if fitted) from the mirror bracket.
3. Using a marker, mark exact position of rear view mirror / aerial on the opposite side of the window.
4. Remove all the old adhesive on the window and mirror / aerial button with a safety blade or utility knife and ensure that surfaces are clean and dry.
5. Cut the top of the tube. Apply the adhesive to the button using the nozzle to spread the adhesive to evenly cover the area. In cold conditions, the adhesive may be difficult to dispense, warm to room temperature.
6. Place the activated mesh over the adhesive on the button. Use tip of the bottle to press the mesh onto the adhesive allowing mesh to become saturated taking care to ensure the button is the right way up, apply it immediately to the windscreen in the position marked previously.
7. Hold firmly in place for at least 30 seconds (1 minute if mirror and button are one part). Allow adhesive to set for 15 minutes before attaching themirror to the button or adjusting the mirror.
Caution:
Causes Skin Irritation. May cause an allergic skin reaction. Causes serious eye damage. May cause respiratory irritation. Harmful to aquatic life with long lasting effects. If medical advice is needed, have label or container to hand. Keep out of reach of children. Dispose of waste and residues in accordance with local authority requirements. Avoid breathing vapours. Avoid release to the environment. Wear protective gloves/eye protection.
If On Skin: Wash with plenty of soap and water.
If In Eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do so. Continue rinsing. If skin irritation or rash occurs: get medical advice / attention.
Loctite Rear View Mirror Bonder Technical Information
Barcode: 5010266168227
Weight: 0.09kg
Loctite Rear View Mirror Bonder 0.5ml
Loctite Rear View Mirror Bonder is a specialist adhesive that permanently bonds glass to metal, resistant to UV, moisture and most chemicals. It is ideal for glass mounted rear view mirrors, phone and radio aerials.
+ Suitable for glass and metal only.
+ Bonds in minutes.
+ Clean and easy to use.
Size: 0.5ml
Loctite Rear View Mirror Bonder Usage Instructions
Ensure hands and tools are free from grease and dirt before starting the repair. Adhesive performs best at room temperature.
1. The kit contains a tube of adhesive and an activated mesh. Trim mesh to the size of the mirror or aerial button.
2. Remove mounting button (if fitted) from the mirror bracket.
3. Using a marker, mark exact position of rear view mirror / aerial on the opposite side of the window.
4. Remove all the old adhesive on the window and mirror / aerial button with a safety blade or utility knife and ensure that surfaces are clean and dry.
5. Cut the top of the tube. Apply the adhesive to the button using the nozzle to spread the adhesive to evenly cover the area. In cold conditions, the adhesive may be difficult to dispense, warm to room temperature.
6. Place the activated mesh over the adhesive on the button. Use tip of the bottle to press the mesh onto the adhesive allowing mesh to become saturated taking care to ensure the button is the right way up, apply it immediately to the windscreen in the position marked previously.
7. Hold firmly in place for at least 30 seconds (1 minute if mirror and button are one part). Allow adhesive to set for 15 minutes before attaching themirror to the button or adjusting the mirror.
Caution:
Causes Skin Irritation. May cause an allergic skin reaction. Causes serious eye damage. May cause respiratory irritation. Harmful to aquatic life with long lasting effects. If medical advice is needed, have label or container to hand. Keep out of reach of children. Dispose of waste and residues in accordance with local authority requirements. Avoid breathing vapours. Avoid release to the environment. Wear protective gloves/eye protection.
If On Skin: Wash with plenty of soap and water.
If In Eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do so. Continue rinsing. If skin irritation or rash occurs: get medical advice / attention.
Loctite Rear View Mirror Bonder Technical Information
Barcode: 5010266168227
Weight: 0.09kg