Bonda Marine G4 Primer Sealer 1kg

Bonda Marine G4 Primer Sealer performs a vital function as a primer when bonding fibreglass to wood, metal and concrete. Apply to clean, dry and well prepared surfaces and leave until finger tacky then apply polyester resin and glassfibre.
Also, when applied to wood as a continuous film it forms a non-porous plastic coating which is tough and flexible. A moisture cured single part polyurethane adhesive. A tough yet flexible coating, that is heard wearing. Performs a vital function as a primer when bonding fibre glass to wood, metal and concrete.

To Download the Product Data Sheet (PDF) for Bonda Marine G4 Primer Sealer Click HERE

Coverage: 500g/m²

Size: 1kg
Also Available: Bonda Marine G4 Primer Sealer 500g, Bonda Marine G4 Primer Sealer 2.5kg and Bonda Marine G4 Primer Sealer 5kg

Bonda Marine G4 Primer Sealer Usage Instructions

Preparation: G4 should be applied onto a bare, clean and dry substrate. Existing coatings, paint or other treatments should be removed.
Application: Apply by brush or roller.
Coats: After a single coat, apply polyester resin and glass fibre.
Drying Time: 60-90 minutes.
Re-coating Time: Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats.
Application Temp: G4 can be applied in poor weather conditions, high humidity and at temperatures down to 0°C.
Clean-Up: Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.

Bonda Marine G4 Primer Sealer Technical Information

Barcode: 5014197121825
Weight: 1.0kg

Hazards: Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention.
After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.

To Download the prduct safety data sheet (PDF), Click HERE