Bonda Marine Wood Seal 1 Litre

Bonda Marine Wood Seal is a durable, single component polyurethane sealer which can be applied to all woods and concrete to leave a non-porous finish. 

Type: A moisture cured single part polyurethane varnish.
Intended Use: To be applied for marine use. For wood for a non-porous finish.
Special Features: The coating is tough yet flexible, and has excellent adhesion to many woods, with a high gloss non-yellowing finish.

Colour: Clear

Coverage: 500ml per m²

Size: 1 Litre
Also Available:Bonda Marine Wood Seal 250ml, Bonda Marine Wood Seal 500ml and Bonda Marine Wood Seal 2.5 Litre

and Bonda Marine Wood Seal 5 Litre

Bonda Marine Wood Seal Usage Instructions

Preparation: Should be applied onto a bare, clean and dry substrate. Existing coatings, paint or other treatments should be removed.
Application: Apply by brush or roller.
Coats: 3 coats are optimal.
Drying Time: 60-90 minutes.
Re-coating Time: Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats.
Application Temp: Can be applied in poor weather conditions, high humidity and at temperatures down to 0°C.
Clean-Up: Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.

Bonda Marine Wood Seal Technical Information

Barcode: 5014197122020
Weight: 1.12kg

Shelf-life/Storage: Many years if suitably stored unopened in original container. NOTE; this is a moisturehardened product so storage life of opened tins is limited.

Hazards: Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.

To Download the product safety data sheet (PDF) for Bonda Marine Wood Seal Click HERE