Lignum Wood Preserver Clear 1L

Lignum Wood Preserver is based on microemulsion technology which produces a formulation with a particle size in the nanometre range. This tiny particle size then allows the formulation to penetrate deep into the wood to deliver active ingredients (a combination of insecticide & fungicides) to prevent wood boring insect attack and prevent wood rot/decay. Lignum Wood Preserver is effective against a wide range of wood rotting fungi (both wet & dry rot) whilst the pyrethroid insecticide is effective against all life stages of wood boring insects (i.e. woodworm). It has virtually no odour and can be applied either by brush or low-pressure spray to provide lasting protection. The formulation is water-based producing a non-flammable, quick-drying product containing no volatile organic compounds (VOCs) and is ready to apply directly from the container.

• Also available individually See: Lignum Wood Preserver Clear 1L
• Also available in 5L - See: Lignum Wood Preserver Clear 5L

Lignum Wood Preserver Clear 1L Usage Instructions

• Preparation: Wood should be clean and free from wood dust and other contaminants.
• Application Method: Apply by Brush or Low Pressure Spray.
• Coverage: Approximately 200ml/m² (1L per 5m²)
• Drying: The product is touch dry in 1 hour depending on wood and ambient conditions. Unprotected persons and animals should be kept away from treated surfaces until dry.
• Finish: The product does not have a finish and leaves the same effect as applying water or solvent. It is always advisable to try on a small inconspicuous area before application to ensure the product finish is as expected.
• Stability: The product is stable in its original packaging for 2 years when stored under ambient conditions. After 2 years product should be re-tested every 6 months to ensure active ingredient levels are within specification.

Lignum Wood Preserver Clear 1L Technical Information

• Weight: 7.5kg
• Barcode: 5060319271282