Associated Products
Rustins Wood Dye Brown Mahogany 1 Litre
Rustins Wood Dye Brown Mahogany is for use on bare wood prior to finishing with any of Rustins wood finishes.
Rustins Wood Dye Brown Mahogany 1 Litre
Intended Use: For application to all types of new bare wood or that has been stripped. Suitable for interior and exterior use. The dye must be over-coated/sealed.
Coverage Up to 24m² per litre, per coat, depending on the absorbency of the wood.
Size: 1 Litre
Also Available: Rustins Wood Dye Brown Mahogany 250ml and Rustins Wood Dye Brown Mahogany 2.5 Litre
Rustins Wood Dye Brown Mahogany Usage Instructions
Application: Using a rag or brush, apply an even coat and wipe off any excess. The result will be much darker on softwoods than on hardwoods. For a lighter shade, dilute with White Spirit, 2 parts dye to 1 part White Spirit. Before use check that the colour is what is required .
Coats: Usually 1 application is sufficient, or 2 for a darker colour.
Drying Time: A few hours under good conditions, but will depend on ambient temperature, humidity and the absorbency of the wood.
Re-coating Time: 6-8 hours typically, but preferably overnight if applying acrylic water-based varnishes.
Application Temp: Ideally 15-25°C.
Compatibility: Can be used under all Rustins wood finishes, such as Quick Drying Varnish, Polyurethane Varnish, Plastic Coating, Danish Oil, Teak Oil, French Polish/Shellac. It can be mixed with Rustin’s Polyurethane Varnish, Danish Oil and Teak Oil at up to 20%. However, the best result is achieved by application of dye to bare wood.
Settlement: STIR WELL AND SHAKE VIGOROUSLY BEFORE USE.
Clean-Up: Equipment can be cleaned using White Spirit.
Barcode: 5015332650316
Size: 1.12kg
Hazards: Flammable. Harmful. May cause lung damage if swallowed. Keep out of reach of children. Use only in well ventilated areas. If swallowed do not induce vomiting; seek medical advice immediately and show the container. Keep away from sources of ignition.
Shelf-life/Storage: Many years if stored in original, tightly closed container, in a cool dry place.
Rustins Wood Dye Brown Mahogany 1 Litre
Intended Use: For application to all types of new bare wood or that has been stripped. Suitable for interior and exterior use. The dye must be over-coated/sealed.
Coverage Up to 24m² per litre, per coat, depending on the absorbency of the wood.
Size: 1 Litre
Also Available: Rustins Wood Dye Brown Mahogany 250ml and Rustins Wood Dye Brown Mahogany 2.5 Litre
Rustins Wood Dye Brown Mahogany Usage Instructions
Application: Using a rag or brush, apply an even coat and wipe off any excess. The result will be much darker on softwoods than on hardwoods. For a lighter shade, dilute with White Spirit, 2 parts dye to 1 part White Spirit. Before use check that the colour is what is required .
Coats: Usually 1 application is sufficient, or 2 for a darker colour.
Drying Time: A few hours under good conditions, but will depend on ambient temperature, humidity and the absorbency of the wood.
Re-coating Time: 6-8 hours typically, but preferably overnight if applying acrylic water-based varnishes.
Application Temp: Ideally 15-25°C.
Compatibility: Can be used under all Rustins wood finishes, such as Quick Drying Varnish, Polyurethane Varnish, Plastic Coating, Danish Oil, Teak Oil, French Polish/Shellac. It can be mixed with Rustin’s Polyurethane Varnish, Danish Oil and Teak Oil at up to 20%. However, the best result is achieved by application of dye to bare wood.
Settlement: STIR WELL AND SHAKE VIGOROUSLY BEFORE USE.
Clean-Up: Equipment can be cleaned using White Spirit.
Barcode: 5015332650316
Size: 1.12kg
Hazards: Flammable. Harmful. May cause lung damage if swallowed. Keep out of reach of children. Use only in well ventilated areas. If swallowed do not induce vomiting; seek medical advice immediately and show the container. Keep away from sources of ignition.
Shelf-life/Storage: Many years if stored in original, tightly closed container, in a cool dry place.
Associated Products