Rustins Acrylic Wood Filler Oak 250ml

Rustins Acrylic Wood Filler Oak is a fast drying, ready to use flexible filler that is easy to sand, stain and paint. Suitable for interior and exterior use. Designed for general and minor repairs for all types of interior and exterior timber. Use to fill nail holes, dents and cracks in wood.

Type: An acrylic based, ready to use multi-purpose filler, designed for general and minor repairs for all types of interior and exterior timber. Available in Natural, Mahogany, Teak, Oak and White.
Intended Use: To fill nail holes, dents and cracks in wood. For interior and exterior use.
Special Features: Does not crack. Quick drying and easily sanded. Maybe dyed, varnished or painted.

Colour: Oak
Also available in Mahogany, Teak, Natural and White. To see the full Range of Rustins Acrylic Wood Filler Click HERE

To Download Colour Chart Rustins Acrylic Wood Filler Click HERE

Size: 250ml

To Download Product Information Sheet (PDF) Click HERE

Rustins Acrylic Wood Filler Oak Usage Instructions

Preparation: Before applying ensure that area to be filled is sanded smooth, clean, dry and free from wax and dust.
Application: Apply using a putty knife, forcing into the cracks and holes. Leave slightly proud of the surface to allow for possible shrinkage and to enable sanding. Allow to dry for 2 hours under good conditions. Never exceed layers of 3 mm when applying or shorten the drying time. If it is cold or damp it may require longer to dry. If the hole to be filled is deep, it should be filled in layers of 3 mm allowing each to dry before further layers are applied.
Drying Time: 2 hours depending on the temperature and humidity. Do not use below 10°C or in high humidity.
Over-coating Time: Leave to dry for 2-3 hours before applying undercoat or varnish. Deep filled area may require longer.
Application Temp: Ideally 15-25°C.
Compatibility: Can be used under all Rustins paints and varnishes. Most other brands should be compatible but if in doubt carry out a small test. Always test first on an inconspicuous area to check that the colour is correct. The Wood Filler may accept dyes and stains differently to the surrounding wood.
Settlement: Stir well if there is any sign of separation.
Clean-Up: Clean all equipment immediately after use with warm water.

Rustins Acrylic Wood Filler Oak Technical Information

Barcode: 5015332002344
Weight: 0.25kg

Shelf-life/Storage: A very long time if stored in original sealed container in a cool dry place. Do not store below 5°C.
Hazards: Keep out of reach of children. Wash hands after use.

To Download the Safety Data Sheet (PDF) for Rustins Acrylic Wood Filler Click HERE