Associated Products
Rustins Styrene Free Professional Wood Filler White 1kg
Rustins Styrene Free Professional Wood Filler White is a two-part filler that provides a strong long lasting repair for all interior and exterior wood work.
Rustins Styrene Free Professional Wood Filler White
Rustins Styrene Free Professional Wood Filler is an easy to use high quality styrene free two part filler with rapid hardening properties for filling and repairing wood, metal and concrete.
Made from fine particle sized fillers, the surface, when sanded, is fine and dense. It is easy to sand and readily accepts Rustins Wood Dyes as well as Rustins Paints and Varnishes.
Once fully hardened, it can be sanded, drilled, machined and planed and is particularly useful for carrying out repairs to the edges on joinery where high strength is needed.
Wood: Filling holes, splits and shakes and damaged edges on joinery, repairing window and door frames.
Metal: Filling dents and holes in cars and vehicle bodies. Smoothes out weld joints and rough metal pipes/gutters. Securing bolts and screws.
Concrete: Fills cracks and holes. Can be used to bond and build up damaged areas.
Colour: White
Rustins Styrene Free Professional Wood Filler White Instructions
Preparation: The surface must be clean, dry and free from all traces of oil, grease and dust. To provide good adhesion to timber, key the surface by lightly sanding with a medium grade of sand-paper.
Application: Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio. Mix thoroughly until an even colour is obtained. Do not prepare more than is required as any excess will be unusable after 10 mins.
Applicator: Mix using the applicator provided or use a putty knife but apply using the applicator provided. Apply sufficient filler so that it is proud of the surface to allow a continuous smooth surface to be obtained by sanding.
Curing Time: 30 mins – 1 hr depending on temperature and humidity.
Re-coating Time: Once fully cured and after sanding back, most paints can be applied.
Application Temp: deally 15-25°C, but do not use below 10°C
Barcode: 5015332004249
Weight: 1.06kg
To Download the Safety Data Sheet (PDF) Rustins Styrene Free Professional Wood Filler White Click HERE
Hazards: Harmful by inhalation. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.
Shelf-life/Storage: 18 months if stored under the recommended conditions. Store in cool and dry place below 25 deg C.
Rustins Styrene Free Professional Wood Filler White
Rustins Styrene Free Professional Wood Filler is an easy to use high quality styrene free two part filler with rapid hardening properties for filling and repairing wood, metal and concrete.
Made from fine particle sized fillers, the surface, when sanded, is fine and dense. It is easy to sand and readily accepts Rustins Wood Dyes as well as Rustins Paints and Varnishes.
Once fully hardened, it can be sanded, drilled, machined and planed and is particularly useful for carrying out repairs to the edges on joinery where high strength is needed.
Wood: Filling holes, splits and shakes and damaged edges on joinery, repairing window and door frames.
Metal: Filling dents and holes in cars and vehicle bodies. Smoothes out weld joints and rough metal pipes/gutters. Securing bolts and screws.
Concrete: Fills cracks and holes. Can be used to bond and build up damaged areas.
Colour: White
Rustins Styrene Free Professional Wood Filler White Instructions
Preparation: The surface must be clean, dry and free from all traces of oil, grease and dust. To provide good adhesion to timber, key the surface by lightly sanding with a medium grade of sand-paper.
Application: Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio. Mix thoroughly until an even colour is obtained. Do not prepare more than is required as any excess will be unusable after 10 mins.
Applicator: Mix using the applicator provided or use a putty knife but apply using the applicator provided. Apply sufficient filler so that it is proud of the surface to allow a continuous smooth surface to be obtained by sanding.
Curing Time: 30 mins – 1 hr depending on temperature and humidity.
Re-coating Time: Once fully cured and after sanding back, most paints can be applied.
Application Temp: deally 15-25°C, but do not use below 10°C
Barcode: 5015332004249
Weight: 1.06kg
To Download the Safety Data Sheet (PDF) Rustins Styrene Free Professional Wood Filler White Click HERE
Hazards: Harmful by inhalation. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.
Shelf-life/Storage: 18 months if stored under the recommended conditions. Store in cool and dry place below 25 deg C.
Associated Products