Wudcare Styrene Free Easy Stain Wudfil Wood Repair Filler Paste Pine 250ml
Wudcare Styrene Free Easy Stain Wudfil Wood Repair Filler Paste Pine is a two part wood filler. Provides a strong long lasting repair, for all interior and exterior wood work.
I'm sorry, we've sold out
Don't worry, if you enter your email below we'll notify you when it's back in stock!
Wudcare Styrene Free Easy Stain Wudfil Wood Repair Filler Paste Pine is a two part filler (filler and hardener), which when dry is ready to be stained or painted. Hardening takes approximately 10-15 minutes. Once hardened or cured, Wudfil Woodfiller is easily sanded smooth and will take stains and varnishes. It has the ability to take a sharp edge without crumbling, making it the best choice for filling on an edge where a corner needs to be reformed.
Colour: PINE
Size: 250ml
To Download Product Information Sheet (PDF) Click HERE
Preparation: The surface must be clean, dry and free from all traces of oil, grease and dust.
To provide good adhesion to timber, key the surface by lightly sanding with a medium grade of sand paper.
Application:
Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio.
Drying Time: Approx. 10 minutes depending on temperature and humidity.
Re-coating Time: Once fully cured and after sanding back, most paints can be applied
For best results sand before staining and finishing.
Barcode: 5015332003945
Weight: 0.30kg
To Download the Safety Data Sheet (PDF) for Click HERE
Wudcare Styrene Free Easy Stain Wudfil Wood Repair Filler Paste Pine is a two part filler (filler and hardener), which when dry is ready to be stained or painted. Hardening takes approximately 10-15 minutes. Once hardened or cured, Wudfil Woodfiller is easily sanded smooth and will take stains and varnishes. It has the ability to take a sharp edge without crumbling, making it the best choice for filling on an edge where a corner needs to be reformed.
Colour: PINE
Size: 250ml
To Download Product Information Sheet (PDF) Click HERE
Preparation: The surface must be clean, dry and free from all traces of oil, grease and dust.
To provide good adhesion to timber, key the surface by lightly sanding with a medium grade of sand paper.
Application:
Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio.
Drying Time: Approx. 10 minutes depending on temperature and humidity.
Re-coating Time: Once fully cured and after sanding back, most paints can be applied
For best results sand before staining and finishing.
Barcode: 5015332003945
Weight: 0.30kg
To Download the Safety Data Sheet (PDF) for Click HERE