![image](/images/products/small/WFSFPI500-201125034941-1.jpg)
Wudcare Styrene Free Easy Stain Wudfil Wood Repair Filler Paste Pine 500ml
Wudcare Styrene Free Easy Stain Wudfil Wood Repair Filler Paste Pine is a two part wood filler. Provides a strong long lasting repair, for all interior and exterior wood work.
Wudcare Styrene Free Easy Stain Wudfil Wood Repair Filler Paste Pine is a two part filler (filler and hardener), which when dry is ready to be stained or painted. Hardening takes approximately 10-15 minutes. Once hardened or cured, Wudfil Woodfiller is easily sanded smooth and will take stains and varnishes. It has the ability to take a sharp edge without crumbling, making it the best choice for filling on an edge where a corner needs to be reformed.
Colour: PINE
Size: 500ml
To Download Product Information Sheet (PDF) Click HERE
Preparation: The surface must be clean, dry and free from all traces of oil, grease and dust.
To provide good adhesion to timber, key the surface by lightly sanding with a medium grade of sand paper.
Application:
Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio.
Drying Time: Approx. 10 minutes depending on temperature and humidity.
Re-coating Time: Once fully cured and after sanding back, most paints can be applied
For best results sand before staining and finishing.
Barcode: 5015332003952
Weight: 0.52kg
To Download the Safety Data Sheet (PDF) for Click HERE
Wudcare Styrene Free Easy Stain Wudfil Wood Repair Filler Paste Pine is a two part filler (filler and hardener), which when dry is ready to be stained or painted. Hardening takes approximately 10-15 minutes. Once hardened or cured, Wudfil Woodfiller is easily sanded smooth and will take stains and varnishes. It has the ability to take a sharp edge without crumbling, making it the best choice for filling on an edge where a corner needs to be reformed.
Colour: PINE
Size: 500ml
To Download Product Information Sheet (PDF) Click HERE
Preparation: The surface must be clean, dry and free from all traces of oil, grease and dust.
To provide good adhesion to timber, key the surface by lightly sanding with a medium grade of sand paper.
Application:
Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio.
Drying Time: Approx. 10 minutes depending on temperature and humidity.
Re-coating Time: Once fully cured and after sanding back, most paints can be applied
For best results sand before staining and finishing.
Barcode: 5015332003952
Weight: 0.52kg
To Download the Safety Data Sheet (PDF) for Click HERE