![image](/images/products/small/WFOCM16600W1-201014012022-1.jpg)
Wudcare Wudfil Wood Repair Filler Paste Cream 500ml
A two part wood filler. Provides a strong long lasting repair, for all interior and exterior wood work.
I'm sorry, we've sold out
Don't worry, if you enter your email below we'll notify you when it's back in stock!
A two part filler (filler and hardener) when dry is ready to be stained
or painted.
Hardening takes approximately ten minutes.
Once hardened or
cured, Wudfil Woodfiller is easily sanded smooth.
It has the ability to
take a sharp edge without crumbling, making it the best choice for
filling on an edge where a corner needs to be reformed.
Colour: Cream
Size: 500ml
Direction for use:
Preparation: The surface must be clean, dry and free from all traces of oil, grease and dust.
To provide good adhesion to timber, key the surface by lightly sanding with a medium grade of sand paper.
Application: Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio.
Coats: Single application should be sufficient.
Drying Time: Approx. 10 minutes depending on temperature and humidity.
Re-coating Time: Once fully cured and after sanding back, most paints can be applied
For best results sand before staining and finishing.
Barcode: 5025506000427
Weight: 520g
A two part filler (filler and hardener) when dry is ready to be stained
or painted.
Hardening takes approximately ten minutes.
Once hardened or
cured, Wudfil Woodfiller is easily sanded smooth.
It has the ability to
take a sharp edge without crumbling, making it the best choice for
filling on an edge where a corner needs to be reformed.
Colour: Cream
Size: 500ml
Direction for use:
Preparation: The surface must be clean, dry and free from all traces of oil, grease and dust.
To provide good adhesion to timber, key the surface by lightly sanding with a medium grade of sand paper.
Application: Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio.
Coats: Single application should be sufficient.
Drying Time: Approx. 10 minutes depending on temperature and humidity.
Re-coating Time: Once fully cured and after sanding back, most paints can be applied
For best results sand before staining and finishing.
Barcode: 5025506000427
Weight: 520g