image

100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Associated Products

Rustins Shellac Sanding Sealer 4 Litre

Product Code: SANS4000
£98.99
RRP £134.50 | SAVE £35.51
Item in Stock

Rustins Shellac Sanding Sealer is manufactured from Pure Shellac and alcohol with a special additive included to facilitate sanding when dry.

Product Features:
Pure shellac and alcohol
Seals wood before waxing
Seals wood dye to prevent bleeding
Application Temp. Use in a warm, dry atmosphere, ideally 15- 25 ºC
Coverage 13-15m² per Litre

Rustins Shellac Sanding Sealer 4 Litre

Rustins Shellac Sanding Sealer is manufactured from Pure Shellac and alcohol with a special additive included to facilitate sanding when dry. It is also used to seal wood before waxing and to seal wood dyes to prevent bleeding.

Intended Use Suitable for sealing all types of wood prior to French Polishing, before waxing or as a finish in its own right.
Type Flake shellac dissolved in alcohol.
Special Features Contains additives that facilitate sanding when dry.

Coverage 13-15m² per Litre

Size: 4 Litre

Also Available: Rustins Shellac Sanding Sealer 300mlRustins Shellac Sanding Sealer 500ml and Rustins Shellac Sanding Sealer 1 Litre

Rustins Shellac Sanding Sealer Usage Instructions

Preparation:Wood should be clean and smooth. If grain is open, fill with Rustin’s Grain filler. Furniture that is to be renovated should be cleaned with white spirit and fine wire wool to ensure that it is free from grease and wax.
Application: Apply liberally with a soft brush or pad and allow to dry. Rub down lightly with glass paper before applying a second coat When used as a finish rub with 00 or 000 steel wool and wax polish finishing with a soft cloth or yellow duster.
Coats: As a finish, apply as many coats as required to build a sufficient layer of shellac. For sealing wood before waxing, apply 2 liberal coats.
Drying Time: 1-2 hours, depending on temperature and humidity
Re-coating Time: 2 hours, depending on temperature and humidity.
Application Temp: Use in a warm, dry atmosphere, ideally 15- 25 ºC
Maintenance: Wipe with damp cloth. Greasy or dirty surfaces should be cleaned with a mild non abrasive liquid detergent. Avoid using harsh cleaning agents. Wax polishes may be used.
Compatibility: Wood may be dyed with Rustin’s Wood Dye prior to sealing with Rustin’s Sanding Sealer. The Sanding Sealer may then be waxed.
Settlement: Shake thoroughly before use
Clean-Up All equipment must be cleaned whilst wet with Methylated Spirits.

Rustins Shellac Sanding Sealer Technical Information

Barcode - 5015332470020
Weight: 4.19kg

Shelf-life/Storage: A very long time if stored in a sealed container in a cool, dry place.
Hazards:
Highly Flammable. Harmful by inhalation, in contact with skin and if swallowed. Keep out of reach of children. Keep container tightly closed. Keep away from sources of ignition No smoking. Do not breathe vapour. Avoid contact with skin and eyes. In case of accident or if you feel unwell, seek medical advice immediately, (show the label where possible). 

Load more reviews

Rustins Shellac Sanding Sealer 4 Litre

Rustins Shellac Sanding Sealer is manufactured from Pure Shellac and alcohol with a special additive included to facilitate sanding when dry. It is also used to seal wood before waxing and to seal wood dyes to prevent bleeding.

Intended Use Suitable for sealing all types of wood prior to French Polishing, before waxing or as a finish in its own right.
Type Flake shellac dissolved in alcohol.
Special Features Contains additives that facilitate sanding when dry.

Coverage 13-15m² per Litre

Size: 4 Litre

Also Available: Rustins Shellac Sanding Sealer 300mlRustins Shellac Sanding Sealer 500ml and Rustins Shellac Sanding Sealer 1 Litre

Rustins Shellac Sanding Sealer Usage Instructions

Preparation:Wood should be clean and smooth. If grain is open, fill with Rustin’s Grain filler. Furniture that is to be renovated should be cleaned with white spirit and fine wire wool to ensure that it is free from grease and wax.
Application: Apply liberally with a soft brush or pad and allow to dry. Rub down lightly with glass paper before applying a second coat When used as a finish rub with 00 or 000 steel wool and wax polish finishing with a soft cloth or yellow duster.
Coats: As a finish, apply as many coats as required to build a sufficient layer of shellac. For sealing wood before waxing, apply 2 liberal coats.
Drying Time: 1-2 hours, depending on temperature and humidity
Re-coating Time: 2 hours, depending on temperature and humidity.
Application Temp: Use in a warm, dry atmosphere, ideally 15- 25 ºC
Maintenance: Wipe with damp cloth. Greasy or dirty surfaces should be cleaned with a mild non abrasive liquid detergent. Avoid using harsh cleaning agents. Wax polishes may be used.
Compatibility: Wood may be dyed with Rustin’s Wood Dye prior to sealing with Rustin’s Sanding Sealer. The Sanding Sealer may then be waxed.
Settlement: Shake thoroughly before use
Clean-Up All equipment must be cleaned whilst wet with Methylated Spirits.

Rustins Shellac Sanding Sealer Technical Information

Barcode - 5015332470020
Weight: 4.19kg

Shelf-life/Storage: A very long time if stored in a sealed container in a cool, dry place.
Hazards:
Highly Flammable. Harmful by inhalation, in contact with skin and if swallowed. Keep out of reach of children. Keep container tightly closed. Keep away from sources of ignition No smoking. Do not breathe vapour. Avoid contact with skin and eyes. In case of accident or if you feel unwell, seek medical advice immediately, (show the label where possible). 

Load more reviews

Associated Products


100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960