Associated Products
Bonda Wood Stop Wood and Grain Filler White 250ml
Bonda Wood Stop Wood and Grain Filler White is an air dried one part filler for small holes, splits and damaged areas of wood.
Bonda Wood Stop Wood and Grain Filler White 250ml
Bonda Wood Stop Wood and Grain Filler White is for hard or softwood. An air dried one part filler for small holes, splits and damaged areas of wood. Ideal for filling surface imperfections and damaged wood grain. Rapid drying. Can also be varnished or painted. Easy to sand and leaves a smooth dense surface.
Type: Air dried one-part wood filler.
Intended Use: For small holes, splits and damaged areas on the surface of hard or soft woods. For interior and exterior use.
Special Features: Perfect for filling surface imperfections and damaged wood grain.
To Download the Product Information Sheet (PDF) for Bonda Wood Stop Click HERE
Colour: White
To see the Full Range of Bonda Wood Stop Click HERE
Size: 250ml
Bonda Wood Stop Wood and Grain Filler White Usage Instructions
Preparation: Should be applied onto a clean and dry substrate.
Application: Apply using a putty knife, forcing into the cracks and holes. Leave slightly proud of the surface to allow for possible shrinkage and to enable sanding. Allow to dry for 2 hours under good conditions. Never exceed layers of 3 mm when applying or shorten the drying time. If it is cold or damp it may require longer to dry. If the hole to be filled is deep, it should be filled in layers of 3 mm allowing each to dry before further layers are applied.
Curing Time: 2 hours depending on the temperature and humidity. Do not use below 10°C or in high humidity.
Re-coating Time: Leave to dry for 2-3 hours before applying undercoat or varnish. Deep filled area may require longer.
Application Temp: Ideally 15-25°C, but do not use below 10°C.
Compatability: Can be used under all Rustins paints and varnishes. Most other brands should be compatible but if in doubt carry out a small test. Always test first on an inconspicuous area to check that the colour is correct. The Wood Filler may accept dyes and stains differently to the surrounding wood.
Settlement: Stir well if there is any sign of separation.
Clean-Up: Clean all equipment immediately after use with warm water.
Bonda Wood Stop Wood and Grain Filler White Technical Information
Barcode: 5014197286029
Weight: 0.31kg
Shelf-life/Storage: A very long time if stored in original sealed container in a cool dry place. Do not store below 5°C.
Hazards: Keep out of reach of children. Wash hands after use.
To download the Safety Data Sheet (PDF) Click HERE
Bonda Wood Stop Wood and Grain Filler White 250ml
Bonda Wood Stop Wood and Grain Filler White is for hard or softwood. An air dried one part filler for small holes, splits and damaged areas of wood. Ideal for filling surface imperfections and damaged wood grain. Rapid drying. Can also be varnished or painted. Easy to sand and leaves a smooth dense surface.
Type: Air dried one-part wood filler.
Intended Use: For small holes, splits and damaged areas on the surface of hard or soft woods. For interior and exterior use.
Special Features: Perfect for filling surface imperfections and damaged wood grain.
To Download the Product Information Sheet (PDF) for Bonda Wood Stop Click HERE
Colour: White
To see the Full Range of Bonda Wood Stop Click HERE
Size: 250ml
Bonda Wood Stop Wood and Grain Filler White Usage Instructions
Preparation: Should be applied onto a clean and dry substrate.
Application: Apply using a putty knife, forcing into the cracks and holes. Leave slightly proud of the surface to allow for possible shrinkage and to enable sanding. Allow to dry for 2 hours under good conditions. Never exceed layers of 3 mm when applying or shorten the drying time. If it is cold or damp it may require longer to dry. If the hole to be filled is deep, it should be filled in layers of 3 mm allowing each to dry before further layers are applied.
Curing Time: 2 hours depending on the temperature and humidity. Do not use below 10°C or in high humidity.
Re-coating Time: Leave to dry for 2-3 hours before applying undercoat or varnish. Deep filled area may require longer.
Application Temp: Ideally 15-25°C, but do not use below 10°C.
Compatability: Can be used under all Rustins paints and varnishes. Most other brands should be compatible but if in doubt carry out a small test. Always test first on an inconspicuous area to check that the colour is correct. The Wood Filler may accept dyes and stains differently to the surrounding wood.
Settlement: Stir well if there is any sign of separation.
Clean-Up: Clean all equipment immediately after use with warm water.
Bonda Wood Stop Wood and Grain Filler White Technical Information
Barcode: 5014197286029
Weight: 0.31kg
Shelf-life/Storage: A very long time if stored in original sealed container in a cool dry place. Do not store below 5°C.
Hazards: Keep out of reach of children. Wash hands after use.
To download the Safety Data Sheet (PDF) Click HERE
Associated Products