Rustins Ring Remover 125ml

Rustins Ring Remover is a mixture of fine abrasives dispersed in special water based lubricating medium.Ideal to remove water and heat mark damage from a range of polished surfaces such as lacquers, varnishes and French Polish. Ring Remover will also restore the gloss and remove minor defects from finishes.

Coverage: 10-12m² per litre per coat, depending on the absorbency of the surface.

Low odour. Made in the UK

Size: 125ml    

Rustins Ring Remover Usage Instructions

Preparation: The surface must be clean, smooth, dry and free from wax, dust and contaminants.
Application: Pour the Ring Remover onto a lint free cloth and rub with pressure over the mark in the direction of the grain until the mark is removed. If the mark does not disappear apply more Ring Remover to the cloth and continue rubbing until the mark is removed. Buff with a clean cloth and then wax if required. For deeper marks the Ring remover can be applied with Rustins Ultra Fine Steel Wool Grade 0000 For satin or matt finishes the same grade of steel wool may be used to matt the surface down after the Ring Remover has been used as it may produce a shiny surface.
Application Temp: Ideally 15-25°C.
Maintenance: Re-apply when necessary.
Compatibility: Compatible most polished surfaces such as lacquers, varnishes and Rustins French Polish.
Settlement: SHAKE WELL BEFORE USE.
Clean-Up: Warm soapy water.

Rustins Ring Remover Technical Information

Barcode: 5015332690299
Weight: 0.18kg

Shelf-life/Storage: Many years if stored in original, tightly closed container in normal conditions. Protect from frost.
Hazards: Non-flammable. Flash point: Nil. Avoid contact with eyes, skin and clothing. Wash hands after use and dry them.