Associated Products
Briwax Toluene Free Wax Polish Dark Oak 370g
Briwax Original Wax Polish Dark Oak is formulated with fast drying, stronger solvents which speed up drying, and also increase the cleaning ability of the wax slightly.
Briwax Toluene Free Wax Polish Dark Oak 370g
Briwax Toluene Free Wax Polish Dark Oak has been blended with slightly milder solvents, so that it gives off less odour whilst drying, whilst at the same time providing a smooth application and finish. The film remains as a paste for slightly longer than Briwax Original to aid the even application and will leave you with the deep grain enriching Briwax shine.
Intended Use: Suitable for use on most wooden surfaces. This product is not recommended for use in areas where it will come into contact with water.
Shade: Dark Oak
Size: 370g
To Download the Product Information Sheet Click HERE
Briwax Toluene Free Wax Polish Dark Oak Usage Instructions
Preparation: The surface must be smooth, clean and dry. Briwax may be used on previously waxed surfaces. For best results, clean surface first with Briwax Furniture Cleaner.
Application: Apply using a lint free cloth or Briwax 0000 Steel Wool, thoroughly working the wax into the grain. When dry buff to desired finish with a soft clean cloth. Note; best results are obtained if the wood has previously been coated with Briwax Shellac Sanding Sealer.
Coats: One coat is usually sufficient, but a second coat may be applied to obtain a higher sheen.
Drying Time: Quick drying. Re-coating Time: If required, re-apply after a few minutes.
Application Temp: Ideally 15-25ºC.
Maintenance: Re-apply as required.
Compatibility: Compatible with all types of wood finishes. If in doubt or when waxing antiques or pre-finished furniture, check compatibility first. For best results and to prevent a blotchy appearance on porous woods, seal untreated surface with a varnish, finishing oil or sanding sealer.
Clean-Up: Hands and application cloth may be cleaned in warm soapy water
Briwax Toluene Free Wax Polish Dark Oak Usage Instructions
Barcode: 5015277277500
Weight: 0.39kg
Above 20°C, Briwax will soften and liquify. Replace lid, put in a cool place and it will return to its original state.
Shelf-life/Storage: A very long time, if stored in the original sealed container in a cool dry place.
Hazards: Flammable. Keep out of reach of children. Keep Container tightly closed. Keep away from all sources of ignition. No smoking.
To Download the Safety Data Sheet (PDF) for Briwax Toluene Free Wax Polish Click HERE
Briwax Toluene Free Wax Polish Dark Oak 370g
Briwax Toluene Free Wax Polish Dark Oak has been blended with slightly milder solvents, so that it gives off less odour whilst drying, whilst at the same time providing a smooth application and finish. The film remains as a paste for slightly longer than Briwax Original to aid the even application and will leave you with the deep grain enriching Briwax shine.
Intended Use: Suitable for use on most wooden surfaces. This product is not recommended for use in areas where it will come into contact with water.
Shade: Dark Oak
Size: 370g
To Download the Product Information Sheet Click HERE
Briwax Toluene Free Wax Polish Dark Oak Usage Instructions
Preparation: The surface must be smooth, clean and dry. Briwax may be used on previously waxed surfaces. For best results, clean surface first with Briwax Furniture Cleaner.
Application: Apply using a lint free cloth or Briwax 0000 Steel Wool, thoroughly working the wax into the grain. When dry buff to desired finish with a soft clean cloth. Note; best results are obtained if the wood has previously been coated with Briwax Shellac Sanding Sealer.
Coats: One coat is usually sufficient, but a second coat may be applied to obtain a higher sheen.
Drying Time: Quick drying. Re-coating Time: If required, re-apply after a few minutes.
Application Temp: Ideally 15-25ºC.
Maintenance: Re-apply as required.
Compatibility: Compatible with all types of wood finishes. If in doubt or when waxing antiques or pre-finished furniture, check compatibility first. For best results and to prevent a blotchy appearance on porous woods, seal untreated surface with a varnish, finishing oil or sanding sealer.
Clean-Up: Hands and application cloth may be cleaned in warm soapy water
Briwax Toluene Free Wax Polish Dark Oak Usage Instructions
Barcode: 5015277277500
Weight: 0.39kg
Above 20°C, Briwax will soften and liquify. Replace lid, put in a cool place and it will return to its original state.
Shelf-life/Storage: A very long time, if stored in the original sealed container in a cool dry place.
Hazards: Flammable. Keep out of reach of children. Keep Container tightly closed. Keep away from all sources of ignition. No smoking.
To Download the Safety Data Sheet (PDF) for Briwax Toluene Free Wax Polish Click HERE
Associated Products