Associated Products
Rustins Pure Tung Oil 1 Litre
Rustin's Pure Tung Oil is a pure natural non-toxic oil and is completely free from solvent. It has good penetration into all types of timber.
Rustins Pure Tung Oil 1 Litre
Intended Use: Suitable for use on all types of interior timber.
Special Features: Has good penetration into all types of timber and its special properties make it highly resistant to water and alcohol and food stuffs. Conforms to Plastic Materials and Articles in contact with Food (England) regulations 2008.
Coverage: 13m² per Litre per coat
To Download the Product Information Sheet (PDF) for Rustins Tung Oil Click HERE
Also Available: Rustins Pure Tung Oil 500ml
Rustins Pure Tung Oil Usage Instructions
Preparation: The surface must be clean, bare and sanded smooth and free of all traces of wax. Pure Tung Oil will bring out the natural colour of wood, but if required the colour of the wood may be changed using Rustins Wood Dye. Always carry out test on a small area to assess the colour of the oil. If natural open-grain is not required then use Rustins Grain Filler before oiling.
Application: Using a clean soft cloth or brush apply liberally and allow the oil to penetrate for 20 minutes. Wipe of the excess with a clean soft cloth. The first coat of Rustins Pure Tung Oil can be diluted with 40% white spirit which will further assist penetration into the timber. Do not dilute subsequent coats. Under warm and dry conditions the product should be allowed to dry for 24 hours before further coats are applied. New or bare wood should be oiled 3 times initially but more coats can be applied for extra protection. The oiled surface should be allowed to cure for a few days before use.
Coats: Two coats are recommended.
Drying Time: More than 24 hrs in good conditions.
Re-coating Time: A minimum of 24 hrs in good conditions.
Application Temp: Ideally 15-25° C. Do not use below 10°C or in conditions of high humidity.
Maintenance: Re-application is recommended annually to keep surfaces in good condition. When applying to previously oiled wood the surface should be first cleaned and any wax removed with white spirit or Rustins Surface Cleaner. If the product is to be applied to a previously coated surface, then carry out a small test for compatibility.
Compatibility: Tung Oil may be used over the following Rustin’s Wood Dye, Grain filler, and Wood filler.
Settlement: Shake well before use.
Clean-Up: Use White Spirit or Rustin’s Brush Cleaner whilst still wet. If dried on, clean equipment and brushes with Rustin’s Brush Restorer.
Rustins Pure Tung Oil Technical Information
Barcode: 5015332200207
Weight: 1.12kg
Shelf-life/Storage: Many years if stored in original, tightly closed container in cool dry conditions.
Hazards: Keep out of reach of children. Avoid contact with skin and eyes. No Smoking.
To Download the Safety Data Sheet (PDF) for Rustins Tung Oil Click HERE
Rustins Pure Tung Oil 1 Litre
Intended Use: Suitable for use on all types of interior timber.
Special Features: Has good penetration into all types of timber and its special properties make it highly resistant to water and alcohol and food stuffs. Conforms to Plastic Materials and Articles in contact with Food (England) regulations 2008.
Coverage: 13m² per Litre per coat
To Download the Product Information Sheet (PDF) for Rustins Tung Oil Click HERE
Also Available: Rustins Pure Tung Oil 500ml
Rustins Pure Tung Oil Usage Instructions
Preparation: The surface must be clean, bare and sanded smooth and free of all traces of wax. Pure Tung Oil will bring out the natural colour of wood, but if required the colour of the wood may be changed using Rustins Wood Dye. Always carry out test on a small area to assess the colour of the oil. If natural open-grain is not required then use Rustins Grain Filler before oiling.
Application: Using a clean soft cloth or brush apply liberally and allow the oil to penetrate for 20 minutes. Wipe of the excess with a clean soft cloth. The first coat of Rustins Pure Tung Oil can be diluted with 40% white spirit which will further assist penetration into the timber. Do not dilute subsequent coats. Under warm and dry conditions the product should be allowed to dry for 24 hours before further coats are applied. New or bare wood should be oiled 3 times initially but more coats can be applied for extra protection. The oiled surface should be allowed to cure for a few days before use.
Coats: Two coats are recommended.
Drying Time: More than 24 hrs in good conditions.
Re-coating Time: A minimum of 24 hrs in good conditions.
Application Temp: Ideally 15-25° C. Do not use below 10°C or in conditions of high humidity.
Maintenance: Re-application is recommended annually to keep surfaces in good condition. When applying to previously oiled wood the surface should be first cleaned and any wax removed with white spirit or Rustins Surface Cleaner. If the product is to be applied to a previously coated surface, then carry out a small test for compatibility.
Compatibility: Tung Oil may be used over the following Rustin’s Wood Dye, Grain filler, and Wood filler.
Settlement: Shake well before use.
Clean-Up: Use White Spirit or Rustin’s Brush Cleaner whilst still wet. If dried on, clean equipment and brushes with Rustin’s Brush Restorer.
Rustins Pure Tung Oil Technical Information
Barcode: 5015332200207
Weight: 1.12kg
Shelf-life/Storage: Many years if stored in original, tightly closed container in cool dry conditions.
Hazards: Keep out of reach of children. Avoid contact with skin and eyes. No Smoking.
To Download the Safety Data Sheet (PDF) for Rustins Tung Oil Click HERE
Associated Products