Associated Products
Rustins Multi-Purpose Floor Shine 1 Litre
Rustins Multi-Purpose Floor Shine is suitable for all types sealed wood, cork, vinyl and lino flooring. Leaves a brilliant shine without buffing.
Rustins Multi-Purpose Floor Shine 1 Litre
Rustins Multi-Purpose Floor Shine is suitable for all types sealed wood, cork, vinyl and lino flooring. It leaves a brilliant shine without buffing. Keeps the gloss on sealed wood and cork floors, also ideal for vinyl and lino. Low odour. Easy application. Quick drying. No buffing required.
Type: Metallised acrylic emulsion, specially formulated for use on wood, cork, vinyl and lino flooring. Leaves a brilliant shine without buffing.
Intended Use: To restore shine (gloss) to all types of coated flooring..
Special Features: Low odour. Easy application. Quick drying, no need to buff. Wash equipment in water. Conforms to Safety of Toys Regulations BS EN Part 3 1995.
Coverage: Approximately 14m² per Litre, 1 coat.
Size: 1 Litre
Also Available in a Case of 4 - SAVE ££ - See: Case of 4 x Rustins Multi-Purpose Floor Shine 1 Litre
To Download the Product Information Sheet (PDF) Click HERE
Rustins Multi-Purpose Floor Shine Usage Instructions
Preparation: The floor must be clean, dry and free from dust. If at any time wax polish has been applied it must be removed using steel wool and white spirit, wiping away the solution formed with a clean rag whilst still damp.
Application: Apply evenly with a mop or cloth and allow to dry. Dries to a brilliant shine, no buffing required. For improved durability a second coat may be applied after 24 hrs.
Coats: 1 or 2 as required, depending on the level of traffic.
Drying Time: 10-20 minutes.
Re-coating Time: 24 hours.
Application Temp: Ideally 15-25°C.
Maintenance: Sweep regularly with a soft broom and clean with a damp cloth. Re-coating will be required at regular intervals. Before re-coating clean with water and detergent but after six or seven coats have been applied, the Floor shine should be removed.
Removal: Remove surface grime with detergent and water. When dry, make a solution of 250ml household ammonia with 3 Litres cold water and apply liberally to the floor. Leave for at least 5 minutes and then remove by scrubbing.
Settlement: SHAKE WELL BEFORE USE
Clean-Up: Clean equipment whilst wet with water
Rustins Multi-Purpose Floor Shine Technical Information
Barcode: 5015332242030
Weight: 1.1kg
Shelf-life/Storage: Many years if stored in original, tightly closed container in normal conditions. Do not store below 5°C. Protect from frost.
Hazards: Non-Flammable. Remove from skin with soap and water. Keep out of reach of children.
To Download the Safety Data Sheet (PDF) for Rustins Multi-Purpose Floor Shine Click HERE
Rustins Multi-Purpose Floor Shine 1 Litre
Rustins Multi-Purpose Floor Shine is suitable for all types sealed wood, cork, vinyl and lino flooring. It leaves a brilliant shine without buffing. Keeps the gloss on sealed wood and cork floors, also ideal for vinyl and lino. Low odour. Easy application. Quick drying. No buffing required.
Type: Metallised acrylic emulsion, specially formulated for use on wood, cork, vinyl and lino flooring. Leaves a brilliant shine without buffing.
Intended Use: To restore shine (gloss) to all types of coated flooring..
Special Features: Low odour. Easy application. Quick drying, no need to buff. Wash equipment in water. Conforms to Safety of Toys Regulations BS EN Part 3 1995.
Coverage: Approximately 14m² per Litre, 1 coat.
Size: 1 Litre
Also Available in a Case of 4 - SAVE ££ - See: Case of 4 x Rustins Multi-Purpose Floor Shine 1 Litre
To Download the Product Information Sheet (PDF) Click HERE
Rustins Multi-Purpose Floor Shine Usage Instructions
Preparation: The floor must be clean, dry and free from dust. If at any time wax polish has been applied it must be removed using steel wool and white spirit, wiping away the solution formed with a clean rag whilst still damp.
Application: Apply evenly with a mop or cloth and allow to dry. Dries to a brilliant shine, no buffing required. For improved durability a second coat may be applied after 24 hrs.
Coats: 1 or 2 as required, depending on the level of traffic.
Drying Time: 10-20 minutes.
Re-coating Time: 24 hours.
Application Temp: Ideally 15-25°C.
Maintenance: Sweep regularly with a soft broom and clean with a damp cloth. Re-coating will be required at regular intervals. Before re-coating clean with water and detergent but after six or seven coats have been applied, the Floor shine should be removed.
Removal: Remove surface grime with detergent and water. When dry, make a solution of 250ml household ammonia with 3 Litres cold water and apply liberally to the floor. Leave for at least 5 minutes and then remove by scrubbing.
Settlement: SHAKE WELL BEFORE USE
Clean-Up: Clean equipment whilst wet with water
Rustins Multi-Purpose Floor Shine Technical Information
Barcode: 5015332242030
Weight: 1.1kg
Shelf-life/Storage: Many years if stored in original, tightly closed container in normal conditions. Do not store below 5°C. Protect from frost.
Hazards: Non-Flammable. Remove from skin with soap and water. Keep out of reach of children.
To Download the Safety Data Sheet (PDF) for Rustins Multi-Purpose Floor Shine Click HERE