Associated Products
NitroMors All Purpose Paint and Varnish Remover 4 Litre
New Formula Nitromors All-Purpose Paint and Varnish Remover is a new double strength, faster acting paint stripper suitable for use on wood, metal and masonry. New Nitromors is the direct replacement for Original Nitromors paint stripper.
NitroMors All Purpose Paint and Varnish Remover 4 Litre
New Formula Nitromors All-Purpose Paint and Varnish Remover is a new double strength, faster acting paint stripper suitable for use on wood, metal and masonry. New Nitromors is the direct replacement for Original Nitromors paint stripper, it is a thick solvent based, but does not contain dichloromethane.
Please Note: Tests have shown that after application New Formula Nitromors takes generally 2-3 minutes longer for the paint to blister, has a longer working time, but requires less applications to get back to bare wood than the original Nitromors.
+ Non drip - ideal for vertical surfaces
+ Green coloured - see where you have applied it
+ Removes paint, varnish and lacquer
+ Water and solvent washable
+ Strips up to twice the paint layers and stays active longer compared to dichloromethane based paint removers.
Coverage: 4 Litre covers up to 10m²
Size: 4 Litre
Also Available: NitroMors All Purpose Paint and Varnish Remover 375ml and 750ml NitroMors All Purpose Paint and Varnish Remover 750ml
NitroMors All Purpose Paint and Varnish Remover Usage Instructions
Preparation:
+ Wear gloves and safety goggles.
+ Work outside if possible.
+ Ensure good ventilation when working indoors.
+ Protect surrounding area with polythene sheeting.
+ Do not use in direct sunlight.
+ Not suitable for removing car paint or for contact with plastics.
Usage Instructions:
1. Pour NitroMors All Purpose Paint and Varnish Remover into overcap. Replace cap immediately. Apply a thick coat by brush with a dabbing action.
Do not brush out. Only apply to areas up to 0.5m². When paint has blistered (5-10 minutes) apply second coat, working into blisters. Leave for 40 minutes. Do not allow to dry out.
2. Remove blistered/softened point with scraper or shavehook. Repeat process if necessary. Remove traces of stubborn paint by rubbing with wire wool dipped in NitroMors All Purpose Paint and Varnish Remover.
3. Wash down with detergent in cold water (use white spirit on fine woods to avoid raising the grain). Allow to dry thoroughly and rub down with fine sandpaper or wire wool.
NitroMors All Purpose Paint and Varnish Remover Technical Information
Barcode: 5010373142783
Weight: 4.39kg
To Download the Safety Data Sheet (PDF) for NitroMors All Purpose Paint and Varnish Remover Click HERE
NitroMors All Purpose Paint and Varnish Remover 4 Litre
New Formula Nitromors All-Purpose Paint and Varnish Remover is a new double strength, faster acting paint stripper suitable for use on wood, metal and masonry. New Nitromors is the direct replacement for Original Nitromors paint stripper, it is a thick solvent based, but does not contain dichloromethane.
Please Note: Tests have shown that after application New Formula Nitromors takes generally 2-3 minutes longer for the paint to blister, has a longer working time, but requires less applications to get back to bare wood than the original Nitromors.
+ Non drip - ideal for vertical surfaces
+ Green coloured - see where you have applied it
+ Removes paint, varnish and lacquer
+ Water and solvent washable
+ Strips up to twice the paint layers and stays active longer compared to dichloromethane based paint removers.
Coverage: 4 Litre covers up to 10m²
Size: 4 Litre
Also Available: NitroMors All Purpose Paint and Varnish Remover 375ml and 750ml NitroMors All Purpose Paint and Varnish Remover 750ml
NitroMors All Purpose Paint and Varnish Remover Usage Instructions
Preparation:
+ Wear gloves and safety goggles.
+ Work outside if possible.
+ Ensure good ventilation when working indoors.
+ Protect surrounding area with polythene sheeting.
+ Do not use in direct sunlight.
+ Not suitable for removing car paint or for contact with plastics.
Usage Instructions:
1. Pour NitroMors All Purpose Paint and Varnish Remover into overcap. Replace cap immediately. Apply a thick coat by brush with a dabbing action.
Do not brush out. Only apply to areas up to 0.5m². When paint has blistered (5-10 minutes) apply second coat, working into blisters. Leave for 40 minutes. Do not allow to dry out.
2. Remove blistered/softened point with scraper or shavehook. Repeat process if necessary. Remove traces of stubborn paint by rubbing with wire wool dipped in NitroMors All Purpose Paint and Varnish Remover.
3. Wash down with detergent in cold water (use white spirit on fine woods to avoid raising the grain). Allow to dry thoroughly and rub down with fine sandpaper or wire wool.
NitroMors All Purpose Paint and Varnish Remover Technical Information
Barcode: 5010373142783
Weight: 4.39kg
To Download the Safety Data Sheet (PDF) for NitroMors All Purpose Paint and Varnish Remover Click HERE
Associated Products