Rustins Quick Drying White Primer and Undercoat 500ml

Rustins Quick Drying Primer and Undercoat White is for use on interior and exterior work. Used as a primer, it is suitable for new and bare wood, MDF, plaster, brickwork and cement. It has high opacity and can be used as an undercoat on primed or painted surfaces. This paint may be overcoated with water or solvent based finishing paints. Clean brushes in water. Available in Grey and White.

Type: Formulated with water borne acrylic emulsion, pigments and extenders to provide excellent opacity.
Intended Use: As a primer for use on bare wood, hardboard, MDF, plaster, brickwork and cement. (Not for priming metals). Can also be used as an undercoat over existing wood and metal primers and over existing paints. For interior and exterior use.
Special Features:  Quick drying. Excellent covering power. Low odour. Clean brushes in water. One coat is usually sufficient to completely cover previous paints and provides the base for new applications.

Coverage Approximately 13m² per Litre, 1 coat, depending on the absorbency of the surface.

Colour: Matt White

Also Available in Matt Grey

Size: 500ml

Also Available in 250ml, 1 Litre and 2.5 Litre Sizes

Rustins Quick Drying White Primer and Undercoat Usage Instructions

Preparation Surfaces to be coated must be clean, dry and free from wax, grease and contaminants. When priming bare wood, knots must be sealed with Rustin’s Knotting. Fill holes and cracks with Rustin’s Wood Filler after priming. As an undercoat over existing paint, the surface must be cleaned and lightly sanded to provide a key before application.
Compatibility  Compatible with many paint products, such as Rustin’s White Gloss Paint and Rustin’s Quick-Drying Radiator Enamel. Not for use as a metal primer. Metals must be primed using Rustin’s Red Oxide Metal Primer.
Application Apply liberally and evenly with a synthetic fibre brush or roller. For brush application, if necessary, the primer coat may be thinned by mixing 5 parts with 1 part water. Do not thin when applying as undercoat.
Clean up Clean brushes and hands immediately after use with water. If dried on, clean equipment and brushes with Rustin’s Brush Restorer.
Settlement  STIR WELL BEFORE USE. Ensure any sediment is thoroughly mixed in.
Coats A minimum of 2 coats are required.
Drying Time Touch dry within 30 minutes, depending on temperature and humidity.
Re-coating Time 2 hours minimum, depending on temperature and humidity.
Application Temp. Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.

Rustins Quick Drying White Primer and Undercoat Technical Information

Barcode: 5015332590025
Weight: 0.56kg