Rustins Quick Drying White Primer and Undercoat 1 Litre

Rustins Quick Drying White Primer and Undercoat is for use on interior and exterior work. Used as a primer, it is suitable for new and bare wood, MDF, plaster, brickwork and cement. It has high opacity and can be used as an undercoat on primed or painted surfaces. This paint may be overcoated with water or solvent based finishing paints.

Intended Use: As a primer for use on bare wood, hardboard, MDF, plaster, brickwork and cement. (Not for priming metals). Can also be used as an undercoat over existing wood and metal primers and over existing paints. For interior and exterior use.
Type: Formulated with water borne acrylic emulsion, pigments and extenders to provide excellent opacity. Available in matt white and matt grey.
Special Features: Quick drying. Excellent covering power. Low odour. Clean brushes in water. One coat is usually sufficient to completely cover previous paints and provides the base for new applications.
Coverage: Approximately 13m² per Litre, 1 coat, depending on the absorbency of the surface.

Colour: White 
Also Available: Rustins Quick Drying Grey Primer and Undercoat

Size: 1 Litre
Also Available: Rustins Quick Drying White Primer and Undercoat 250ml, Rustins Quick Drying White Primer and Undercoat 500ml and Rustins Quick Drying White Primer and Undercoat 2.5 Litre

Rustins Quick Drying White Primer and Undercoat Usage Instructions

Preparation: Surfaces to be coated must be clean, dry and free from wax, grease and contaminants. When priming bare wood, knots must be sealed with Rustin’s Knotting. Fill holes and cracks with Rustin’s Wood Filler after priming. As an undercoat over existing paint, the surface must be cleaned and lightly sanded to provide a key before application.
Compatibility: Compatible with many paint products, such as Rustin’s White Gloss Paint and Rustin’s Quick-Drying Radiator Enamel. Not for use as a metal primer. Metals must be primed using Rustin’s Red Oxide Metal Primer.
Application: Apply liberally and evenly with a synthetic fibre brush or roller. For brush application, if necessary, the primer coat may be thinned by mixing 5 parts with 1 part water. Do not thin when applying as undercoat.
Clean up: Clean brushes and hands immediately after use with water. If dried on, clean equipment and brushes with Rustin’s Brush Restorer.
Settlement: STIR WELL BEFORE USE. Ensure any sediment is thoroughly mixed in.
Coats: A minimum of 2 coats are required.
Drying Time: Touch dry within 30 minutes, depending on temperature and humidity.
Re-coating Time: 2 hours minimum, depending on temperature and humidity.
Application Temp: Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Clean-Up: Clean brushes and hands immediately after use with water. If dried on, clean equipment and brushes with Rustin’s Brush Restorer.

Rustins Quick Drying White Primer and Undercoat Technical Information

Barcode: 5015332590032
Weight: 1.12kg

Shelf-life/Storage: Many years in a cool, dry place if stored in original, tightly closed container. Do not store below 5°C. Protect from frost and extremes of temperature.
Hazards: Non-flammable. Avoid contact with eyes and skin. Eyes and skin should be rinsed immediately if contact occurs with plenty of water. Seek medical attention. Keep container tightly closed and out of reach of children.

To Download the Safety Data Sheet (PDF) for Rustins Quick Drying White Primer and Undercoat Click HERE