Bonda 2 Part Filler Tough Fill 3.5L

A two-part (filler & hardener) filler that is tough enough to drill, screw and hold nails. Hardening takes approximately ten minutes after which can be easily sanded and sharp edges can be formed without the filler crumbling.

Also available in 1L See: Bonda 2 Part Filler Tough Fill 1L

Bonda 2 Part Filler Tough Fill 3.5L Usage Instructions

1. Make sure the area to be filled is clean and free from things such as grease and resin etc.
2. Using the spreader provided take the required amount of filler from the tin
3. Add a small amount of hardener from the tube (approx. a pea size of hardener to a golf ball of filler)
4. Mix thoroughly and use immediately
5. Sand when hard (approx. 10 minutes, this time will vary with temperature)

Bonda 2 Part Filler Tough Fill 3.5L Technical Information

• Weight: 3.9kg
• Barcode: 5015332005147