Associated Products
Rustins White Knotting 125ml
Rustins White Knotting is suitable for sealing knots, resinous and creosoted timber to prevent bleeding through paint film.
Rustins White Knotting 125ml
Rustins White Knotting is suitable for sealing knots, resinous and creosoted timber to prevent bleeding through paint film. White Knotting is made with bleached shellac. For application to bare wood. Clean knots prior to priming/painting. Generally used with oil-based paints.
Type: White Knotting is made with bleached shellac.
Intended Use: For application to bare wood. Clean knots prior to priming/painting. To prevent discolouration of paint film. Generally used with oil-based paints.
Special Features: Fast drying. Prevents discolouration of paints. For interior and exterior use.
Coverage: 10-12m² per Litre, 1 coat, depending on the absorbency of the surface.
White: Also Available: Rustins Brown Knotting
Size: 125ml
Also Available: Rustins White Knotting 300ml and Rustins White Knotting 1 Litre
To Download the Product Information Sheet (PDF) Click HERE
Rustins White Knotting Usage Instructions
Preparation: The surface must be clean, bare and sanded smooth. Clean off any excess resin using white spirit and allow to dry. A heat gun may be used (taking care not to char the wood) to draw-out excess resin, then scrape away. If there are cracks or holes around the knot, fill with Rustin’s Woodfiller, allow to dry, and sand smooth prior to applying Knotting.
Application: Using a brush apply Knotting liberally over the knot and surrounding area.
Coats: Apply 2 coats. Do not sand after application knotting.
Drying Time: Allow 1 hour between coats. Re-coating Time: Allow 1 hr after final coat before applying primer.
Application Temp: Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Compatibility: Most types of wood primers may be applied over Knotting, including Rustin’s Wood Primer (White and Aluminium) and Rustin’s Quick Drying Primer and Undercoat. If the knot needs filling, apply Rustin’s Woodfiller and sand smooth before applying Knotting.
Settlement: SHAKE WELL BEFORE USE.
Clean-Up: Use Rustins Methylated Spirits to clean brushes and equipment. Use Rustins Strypit to remove dried films.
Rustins White Knotting Technical Information
Barcode: 5015332340019
Weight: 0.2kg
To Download the Safety Data Sheet (PDF) for Rustins White Knotting Click HERE
Shelf-life/Storage: Many years if stored in original, tightly closed container in normal conditions.
Hazards: Flammable.
Rustins White Knotting 125ml
Rustins White Knotting is suitable for sealing knots, resinous and creosoted timber to prevent bleeding through paint film. White Knotting is made with bleached shellac. For application to bare wood. Clean knots prior to priming/painting. Generally used with oil-based paints.
Type: White Knotting is made with bleached shellac.
Intended Use: For application to bare wood. Clean knots prior to priming/painting. To prevent discolouration of paint film. Generally used with oil-based paints.
Special Features: Fast drying. Prevents discolouration of paints. For interior and exterior use.
Coverage: 10-12m² per Litre, 1 coat, depending on the absorbency of the surface.
White: Also Available: Rustins Brown Knotting
Size: 125ml
Also Available: Rustins White Knotting 300ml and Rustins White Knotting 1 Litre
To Download the Product Information Sheet (PDF) Click HERE
Rustins White Knotting Usage Instructions
Preparation: The surface must be clean, bare and sanded smooth. Clean off any excess resin using white spirit and allow to dry. A heat gun may be used (taking care not to char the wood) to draw-out excess resin, then scrape away. If there are cracks or holes around the knot, fill with Rustin’s Woodfiller, allow to dry, and sand smooth prior to applying Knotting.
Application: Using a brush apply Knotting liberally over the knot and surrounding area.
Coats: Apply 2 coats. Do not sand after application knotting.
Drying Time: Allow 1 hour between coats. Re-coating Time: Allow 1 hr after final coat before applying primer.
Application Temp: Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Compatibility: Most types of wood primers may be applied over Knotting, including Rustin’s Wood Primer (White and Aluminium) and Rustin’s Quick Drying Primer and Undercoat. If the knot needs filling, apply Rustin’s Woodfiller and sand smooth before applying Knotting.
Settlement: SHAKE WELL BEFORE USE.
Clean-Up: Use Rustins Methylated Spirits to clean brushes and equipment. Use Rustins Strypit to remove dried films.
Rustins White Knotting Technical Information
Barcode: 5015332340019
Weight: 0.2kg
To Download the Safety Data Sheet (PDF) for Rustins White Knotting Click HERE
Shelf-life/Storage: Many years if stored in original, tightly closed container in normal conditions.
Hazards: Flammable.
Associated Products