Associated Products
Rustins White Knotting 300ml
Rustins White Knotting is suitable for sealing knots, resinous and creosoted timber to prevent bleeding through paint film.
Special Features: Fast drying. Prevents discolouration of paints. For interior and exterior use.
Coverage: 10-12m² per Litre, 1 coat, depending on the absorbency of the surface.
To Download the Product Information Sheet (PDF) Click HERE
Preparation: The surface must be clean, bare and sanded smooth. Clean off any excess resin using white spirit and allow to dry. A heat gun may be used (taking care not to char the wood) to draw-out excess resin, then scrape away. If there are cracks or holes around the knot, fill with Rustin’s Woodfiller, allow to dry, and sand smooth prior to applying Knotting.
Application: Using a brush apply Knotting liberally over the knot and surrounding area. Coats Apply 2 coats. Do not sand after application knotting.
Drying Time: Allow 1 hour between coats. Re-coating Time Allow 1 hr after final coat before applying primer.
Application Temp: Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Compatibility: Most types of wood primers may be applied over Knotting, including Rustin’s Wood Primer (Pink, White and Aluminium) and Rustin’s Quick Drying Primer and Undercoat. If the knot needs filling, apply Rustin’s Woodfiller and sand smooth before applying Knotting.
Settlement: SHAKE WELL BEFORE USE.
Clean-Up: Use Methylated Spirits to clean brushes and equipment. Use Rustins Strypit to remove dried films.
Barcode: 5015332340033
Weight: 0.34kg
To Download the Safety Data Sheet (PDF) for Rustins White Knotting Click HERE
Shelf-life/Storage: Many years if stored in original, tightly closed container in normal conditions.
Hazards: Flammable.
Special Features: Fast drying. Prevents discolouration of paints. For interior and exterior use.
Coverage: 10-12m² per Litre, 1 coat, depending on the absorbency of the surface.
To Download the Product Information Sheet (PDF) Click HERE
Preparation: The surface must be clean, bare and sanded smooth. Clean off any excess resin using white spirit and allow to dry. A heat gun may be used (taking care not to char the wood) to draw-out excess resin, then scrape away. If there are cracks or holes around the knot, fill with Rustin’s Woodfiller, allow to dry, and sand smooth prior to applying Knotting.
Application: Using a brush apply Knotting liberally over the knot and surrounding area. Coats Apply 2 coats. Do not sand after application knotting.
Drying Time: Allow 1 hour between coats. Re-coating Time Allow 1 hr after final coat before applying primer.
Application Temp: Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Compatibility: Most types of wood primers may be applied over Knotting, including Rustin’s Wood Primer (Pink, White and Aluminium) and Rustin’s Quick Drying Primer and Undercoat. If the knot needs filling, apply Rustin’s Woodfiller and sand smooth before applying Knotting.
Settlement: SHAKE WELL BEFORE USE.
Clean-Up: Use Methylated Spirits to clean brushes and equipment. Use Rustins Strypit to remove dried films.
Barcode: 5015332340033
Weight: 0.34kg
To Download the Safety Data Sheet (PDF) for Rustins White Knotting Click HERE
Shelf-life/Storage: Many years if stored in original, tightly closed container in normal conditions.
Hazards: Flammable.
Associated Products