HG Mould Spray 500ml

HG Mould Spray effectively removes all black and brown stains caused by mould, fungus, moss and algae inside and outside. HG Mould Spray bleaches grey and black mould spots and green algae spots.

These unsightly black or brown marks are found on the silicon seal between the bath tub and edges of tiles, on the shower cubicles and on plaster. HG Mould Spray is for cleaning tiled walls, (also suitable for marble) and grouting in the bathroom, toilet, kitchen, cellar, basement, sauna, garage, shed etc. HG MouldSpray also cleans facades, balconies, plant boxes and garden ornaments but NOT wood.

For treating ceilings and interior and exterior walls we recommend using our Fungicidal Wash. For smaller areas of paintwork, wallpaper and rubber seals use Fungicidal Spray.

Size: 6 x 500ml or £5.00 each 
Also Available Individually See: HG Mould Spray 500ml

HG Mould Remover Spray Gel is now available (Click Here) - this foam formula sticks to vertical surfaces for longer.

HG Mould Spray Usage Instructions

HG Mould Remover has a bleaching action. If in doubt first test HG Mould Spray on an inconspicuous area or use Fungicidal Spray. Do not remove fungi and algae, but remove moss layers before using HG Mould Spray.

HG Mould Cleaner has a child safety spray nozzle. Press on top of the nipple at the front of the pump and turn a quarter (STREAM or SPRAY). Spraythe surface from 3-5 cm distance and leave HG Mould Spray to work for 30 minutes. In the case of stubborn stains, spray again and leave to work for another 30 minutes. Clean the sprayed surface with a sponge and water. Elastic grouting (for instance silicone paste) must be washed off after 30 minutes and treated with HG Mould Spray again. Turn the nipple a quarter backwards after use into the safetyposition.

For cleaning large surfaces with green deposits we advise using .HG Algae and Mould Remover 1 Litre (Click Here)

Dosage: 500ml of HG Mould Spray is suitable for 2-3m² of wall surfaces, 6-8m of tiled floors.

After using HG Mould Spray use Inspired Mould and Mildew Stopper Spray (Click Here) to help prevent re-growth

HG Mould Spray Technical Information

Barcode: 8711577029456
Weight: 4kg

Attention: Ventilate well when using HG Mould Cleaner. We recommend using an Odour Respirator and Eye Protection. Wear rubber / plastic gloves. Prevent splashing HG Mould Spray on clothing, (high) gloss paint and laminated blinds. Rinse with water immediately in case of contact with skin, clothing and sensitive surfaces. Avoid contact with metals and do not treat coloured surfaces (for coloured surfaces use Fungicidal Spray. We do not recommend using HG Mould Spray on artexed ceilings.

In elastic grouting (for instance silicone paste) sometimes some permanent brown discolouration may occur after using HG Mould Spray. In badly glazed tiles and old tiles with hairline cracks brown discolouration may appear. This brown colour can be removed with Hypo (Sodium Thiosulfate)

Click to download Safety Data Sheet HG Mould Spray Safety Data Sheet (PDF)

This product is not a detergent in the meaning of the Regulation on Detergents (648/2004/EC).